Träger W12×45: Maße und Querschnittswerte
W-Profile (AISC) · W12: 12 in Nennhöhe
W12×45 ist ein AISC-Breitflanschprofil (W12: 12 in Nennhöhe). Es ist 12,1 in (307,3 mm) hoch, mit einem 8,05 in (204,5 mm) breiten Flansch, 0,335 in (8,5 mm) Stegdicke und 0,575 in (14,6 mm) Flanschdicke, und wiegt 45 lb/ft (67,0 kg/m). Fläche 13,1 in² (8.452 mm²); um die starke Achse Ix = 348 in⁴ (14.484,9 cm⁴), Sx = 57,7 in³ (945,5 cm³), Zx = 64,2 in³ (1.052 cm³).
- dHöhe
- 307,3 mm12,1 in12,1 in307,3 mm
- bfFlanschbreite
- 204,5 mm8,05 in8,05 in204,5 mm
- twStegdicke
- 8,5 mm0,335 in0,335 in8,5 mm
- tfFlanschdicke
- 14,6 mm0,575 in0,575 in14,6 mm
Zeichnung
Technische Daten W12×45
| dHöhe | 12,1 in307,3 mm |
|---|---|
| bfFlanschbreite | 8,05 in204,5 mm |
| twStegdicke | 0,335 in8,5 mm |
| tfFlanschdicke | 0,575 in14,6 mm |
| kBemessungswert | 1,08 in27,4 mm |
| kDetaillierungswert | 1 3/8 in34,9 mm |
| k1Detaillierungswert | 15/16 in23,8 mm |
| WGewicht | 45 lb/ft67,0 kg/m |
| AQuerschnittsfläche | 13,1 in²8.452 mm² |
| IxFlächenträgheitsmoment, starke Achse | 348 in⁴14.484,9 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 64,2 in³1.052 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 57,7 in³945,5 cm³ |
| rxTrägheitsradius, starke Achse | 5,15 in130,8 mm |
| IyFlächenträgheitsmoment, schwache Achse | 50 in⁴2.081,2 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 19 in³311,4 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 12,4 in³203,2 cm³ |
| ryTrägheitsradius, schwache Achse | 1,95 in49,5 mm |
| JTorsionsträgheitsmoment | 1,26 in⁴52,45 cm⁴ |
| bf/2tfFlanschschlankheit | 7 |
| h/twStegschlankheit | 29,6 |
| Metrische Bezeichnung | W310×67 |
Auch bekannt als
W310×67
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.