W12×45 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×45 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.1 in (307.3 mm) deep with a 8.05 in (204.5 mm) flange, a 0.335 in (8.5 mm) web and a 0.575 in (14.6 mm) flange, and weighs 45 lb/ft (67.0 kg/m). Area 13.1 in² (8,452 mm²); strong-axis Ix = 348 in⁴ (14,484.9 cm⁴), Sx = 57.7 in³ (945.5 cm³), Zx = 64.2 in³ (1,052 cm³).

dDepth
307.3 mm12.1 in12.1 in307.3 mm
bfFlange width
204.5 mm8.05 in8.05 in204.5 mm
twWeb thickness
8.5 mm0.335 in0.335 in8.5 mm
tfFlange thickness
14.6 mm0.575 in0.575 in14.6 mm

Drawing

204.5 mm8.05 in307.3 mm12.1 intf 14.6 mmtf 0.575 intw 8.5 mmtw 0.335 ink 27.4 mmk 1.08 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×45 specifications

dDepth12.1 in307.3 mm
bfFlange width8.05 in204.5 mm
twWeb thickness0.335 in8.5 mm
tfFlange thickness0.575 in14.6 mm
kDesign value1.08 in27.4 mm
kDetailing value1 3/8 in34.9 mm
k1Detailing value15/16 in23.8 mm
WWeight45 lb/ft67.0 kg/m
AArea13.1 in²8,452 mm²
IxMoment of inertia, strong axis348 in⁴14,484.9 cm⁴
ZxPlastic modulus, strong axis64.2 in³1,052 cm³
SxSection modulus, strong axis57.7 in³945.5 cm³
rxRadius of gyration, strong axis5.15 in130.8 mm
IyMoment of inertia, weak axis50 in⁴2,081.2 cm⁴
ZyPlastic modulus, weak axis19 in³311.4 cm³
SySection modulus, weak axis12.4 in³203.2 cm³
ryRadius of gyration, weak axis1.95 in49.5 mm
JTorsional constant1.26 in⁴52.45 cm⁴
bf/2tfFlange slenderness7
h/twWeb slenderness29.6
Metric designationW310×67

Also known as

W310×67

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.