Träger W18×35: Maße und Querschnittswerte
W-Profile (AISC) · W18: 18 in Nennhöhe
W18×35 ist ein AISC-Breitflanschprofil (W18: 18 in Nennhöhe). Es ist 17,7 in (449,6 mm) hoch, mit einem 6 in (152,4 mm) breiten Flansch, 0,3 in (7,6 mm) Stegdicke und 0,425 in (10,8 mm) Flanschdicke, und wiegt 35 lb/ft (52,1 kg/m). Fläche 10,3 in² (6.645 mm²); um die starke Achse Ix = 510 in⁴ (21.227,8 cm⁴), Sx = 57,6 in³ (943,9 cm³), Zx = 66,5 in³ (1.089,7 cm³).
- dHöhe
- 449,6 mm17,7 in17,7 in449,6 mm
- bfFlanschbreite
- 152,4 mm6 in6 in152,4 mm
- twStegdicke
- 7,6 mm0,3 in0,3 in7,6 mm
- tfFlanschdicke
- 10,8 mm0,425 in0,425 in10,8 mm
Zeichnung
Technische Daten W18×35
| dHöhe | 17,7 in449,6 mm |
|---|---|
| bfFlanschbreite | 6 in152,4 mm |
| twStegdicke | 0,3 in7,6 mm |
| tfFlanschdicke | 0,425 in10,8 mm |
| kBemessungswert | 0,827 in21,0 mm |
| kDetaillierungswert | 1 1/8 in28,6 mm |
| k1Detaillierungswert | 3/4 in19,0 mm |
| WGewicht | 35 lb/ft52,1 kg/m |
| AQuerschnittsfläche | 10,3 in²6.645 mm² |
| IxFlächenträgheitsmoment, starke Achse | 510 in⁴21.227,8 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 66,5 in³1.089,7 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 57,6 in³943,9 cm³ |
| rxTrägheitsradius, starke Achse | 7,04 in178,8 mm |
| IyFlächenträgheitsmoment, schwache Achse | 15,3 in⁴636,8 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 8,06 in³132,1 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 5,12 in³83,9 cm³ |
| ryTrägheitsradius, schwache Achse | 1,22 in31,0 mm |
| JTorsionsträgheitsmoment | 0,506 in⁴21,06 cm⁴ |
| bf/2tfFlanschschlankheit | 7,06 |
| h/twStegschlankheit | 53,5 |
| Metrische Bezeichnung | W460×52 |
Auch bekannt als
W460×52
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.