W18×35 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×35 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 17.7 in (449.6 mm) deep with a 6 in (152.4 mm) flange, a 0.3 in (7.6 mm) web and a 0.425 in (10.8 mm) flange, and weighs 35 lb/ft (52.1 kg/m). Area 10.3 in² (6,645 mm²); strong-axis Ix = 510 in⁴ (21,227.8 cm⁴), Sx = 57.6 in³ (943.9 cm³), Zx = 66.5 in³ (1,089.7 cm³).

dDepth
449.6 mm17.7 in17.7 in449.6 mm
bfFlange width
152.4 mm6 in6 in152.4 mm
twWeb thickness
7.6 mm0.3 in0.3 in7.6 mm
tfFlange thickness
10.8 mm0.425 in0.425 in10.8 mm

Drawing

152.4 mm6 in449.6 mm17.7 intf 10.8 mmtf 0.425 intw 7.6 mmtw 0.3 ink 21.0 mmk 0.827 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×35 specifications

dDepth17.7 in449.6 mm
bfFlange width6 in152.4 mm
twWeb thickness0.3 in7.6 mm
tfFlange thickness0.425 in10.8 mm
kDesign value0.827 in21.0 mm
kDetailing value1 1/8 in28.6 mm
k1Detailing value3/4 in19.0 mm
WWeight35 lb/ft52.1 kg/m
AArea10.3 in²6,645 mm²
IxMoment of inertia, strong axis510 in⁴21,227.8 cm⁴
ZxPlastic modulus, strong axis66.5 in³1,089.7 cm³
SxSection modulus, strong axis57.6 in³943.9 cm³
rxRadius of gyration, strong axis7.04 in178.8 mm
IyMoment of inertia, weak axis15.3 in⁴636.8 cm⁴
ZyPlastic modulus, weak axis8.06 in³132.1 cm³
SySection modulus, weak axis5.12 in³83.9 cm³
ryRadius of gyration, weak axis1.22 in31.0 mm
JTorsional constant0.506 in⁴21.06 cm⁴
bf/2tfFlange slenderness7.06
h/twWeb slenderness53.5
Metric designationW460×52

Also known as

W460×52

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.