Träger W8×35: Maße und Querschnittswerte
W-Profile (AISC) · W8: 8 in Nennhöhe
W8×35 ist ein AISC-Breitflanschprofil (W8: 8 in Nennhöhe). Es ist 8,12 in (206,2 mm) hoch, mit einem 8,02 in (203,7 mm) breiten Flansch, 0,31 in (7,9 mm) Stegdicke und 0,495 in (12,6 mm) Flanschdicke, und wiegt 35 lb/ft (52,1 kg/m). Fläche 10,3 in² (6.645 mm²); um die starke Achse Ix = 127 in⁴ (5.286,1 cm⁴), Sx = 31,2 in³ (511,3 cm³), Zx = 34,7 in³ (568,6 cm³).
- dHöhe
- 206,2 mm8,12 in8,12 in206,2 mm
- bfFlanschbreite
- 203,7 mm8,02 in8,02 in203,7 mm
- twStegdicke
- 7,9 mm0,31 in0,31 in7,9 mm
- tfFlanschdicke
- 12,6 mm0,495 in0,495 in12,6 mm
Zeichnung
Technische Daten W8×35
| dHöhe | 8,12 in206,2 mm |
|---|---|
| bfFlanschbreite | 8,02 in203,7 mm |
| twStegdicke | 0,31 in7,9 mm |
| tfFlanschdicke | 0,495 in12,6 mm |
| kBemessungswert | 0,889 in22,6 mm |
| kDetaillierungswert | 1 3/16 in30,2 mm |
| k1Detaillierungswert | 13/16 in20,6 mm |
| WGewicht | 35 lb/ft52,1 kg/m |
| AQuerschnittsfläche | 10,3 in²6.645 mm² |
| IxFlächenträgheitsmoment, starke Achse | 127 in⁴5.286,1 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 34,7 in³568,6 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 31,2 in³511,3 cm³ |
| rxTrägheitsradius, starke Achse | 3,51 in89,2 mm |
| IyFlächenträgheitsmoment, schwache Achse | 42,6 in⁴1.773,1 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 16,1 in³263,8 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 10,6 in³173,7 cm³ |
| ryTrägheitsradius, schwache Achse | 2,03 in51,6 mm |
| JTorsionsträgheitsmoment | 0,769 in⁴32,01 cm⁴ |
| bf/2tfFlanschschlankheit | 8,1 |
| h/twStegschlankheit | 20,5 |
| Metrische Bezeichnung | W200×52 |
Auch bekannt als
W200×52
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.