Träger W30×116: Maße und Querschnittswerte
W-Profile (AISC) · W30: 30 in Nennhöhe
W30×116 ist ein AISC-Breitflanschprofil (W30: 30 in Nennhöhe). Es ist 30 in (762,0 mm) hoch, mit einem 10,5 in (266,7 mm) breiten Flansch, 0,565 in (14,4 mm) Stegdicke und 0,85 in (21,6 mm) Flanschdicke, und wiegt 116 lb/ft (172,6 kg/m). Fläche 34,2 in² (22.064 mm²); um die starke Achse Ix = 4.930 in⁴ (205.202,1 cm⁴), Sx = 329 in³ (5.391,3 cm³), Zx = 378 in³ (6.194,3 cm³).
- dHöhe
- 762,0 mm30 in30 in762,0 mm
- bfFlanschbreite
- 266,7 mm10,5 in10,5 in266,7 mm
- twStegdicke
- 14,4 mm0,565 in0,565 in14,4 mm
- tfFlanschdicke
- 21,6 mm0,85 in0,85 in21,6 mm
Zeichnung
Technische Daten W30×116
| dHöhe | 30 in762,0 mm |
|---|---|
| bfFlanschbreite | 10,5 in266,7 mm |
| twStegdicke | 0,565 in14,4 mm |
| tfFlanschdicke | 0,85 in21,6 mm |
| kBemessungswert | 1,5 in38,1 mm |
| kDetaillierungswert | 2 1/8 in54,0 mm |
| k1Detaillierungswert | 1 1/2 in38,1 mm |
| WGewicht | 116 lb/ft172,6 kg/m |
| AQuerschnittsfläche | 34,2 in²22.064 mm² |
| IxFlächenträgheitsmoment, starke Achse | 4.930 in⁴205.202,1 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 378 in³6.194,3 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 329 in³5.391,3 cm³ |
| rxTrägheitsradius, starke Achse | 12 in304,8 mm |
| IyFlächenträgheitsmoment, schwache Achse | 164 in⁴6.826,2 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 49,2 in³806,2 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 31,3 in³512,9 cm³ |
| ryTrägheitsradius, schwache Achse | 2,19 in55,6 mm |
| JTorsionsträgheitsmoment | 6,43 in⁴267,64 cm⁴ |
| bf/2tfFlanschschlankheit | 6,17 |
| h/twStegschlankheit | 47,8 |
| Metrische Bezeichnung | W760×173 |
Auch bekannt als
W760×173
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.