Träger W33×118: Maße und Querschnittswerte
W-Profile (AISC) · W33: 33 in Nennhöhe
W33×118 ist ein AISC-Breitflanschprofil (W33: 33 in Nennhöhe). Es ist 32,9 in (835,7 mm) hoch, mit einem 11,5 in (292,1 mm) breiten Flansch, 0,55 in (14,0 mm) Stegdicke und 0,74 in (18,8 mm) Flanschdicke, und wiegt 118 lb/ft (175,6 kg/m). Fläche 34,7 in² (22.387 mm²); um die starke Achse Ix = 5.900 in⁴ (245.576,5 cm⁴), Sx = 359 in³ (5.883 cm³), Zx = 415 in³ (6.800,6 cm³).
- dHöhe
- 835,7 mm32,9 in32,9 in835,7 mm
- bfFlanschbreite
- 292,1 mm11,5 in11,5 in292,1 mm
- twStegdicke
- 14,0 mm0,55 in0,55 in14,0 mm
- tfFlanschdicke
- 18,8 mm0,74 in0,74 in18,8 mm
Zeichnung
Technische Daten W33×118
| dHöhe | 32,9 in835,7 mm |
|---|---|
| bfFlanschbreite | 11,5 in292,1 mm |
| twStegdicke | 0,55 in14,0 mm |
| tfFlanschdicke | 0,74 in18,8 mm |
| kBemessungswert | 1,44 in36,6 mm |
| kDetaillierungswert | 2 in50,8 mm |
| k1Detaillierungswert | 1 1/2 in38,1 mm |
| WGewicht | 118 lb/ft175,6 kg/m |
| AQuerschnittsfläche | 34,7 in²22.387 mm² |
| IxFlächenträgheitsmoment, starke Achse | 5.900 in⁴245.576,5 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 415 in³6.800,6 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 359 in³5.883 cm³ |
| rxTrägheitsradius, starke Achse | 13 in330,2 mm |
| IyFlächenträgheitsmoment, schwache Achse | 187 in⁴7.783,5 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 51,3 in³840,7 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 32,6 in³534,2 cm³ |
| ryTrägheitsradius, schwache Achse | 2,32 in58,9 mm |
| JTorsionsträgheitsmoment | 5,3 in⁴220,6 cm⁴ |
| bf/2tfFlanschschlankheit | 7,76 |
| h/twStegschlankheit | 54,5 |
| Metrische Bezeichnung | W840×176 |
Auch bekannt als
W840×176
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.