W30×116 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×116 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 30 in (762.0 mm) deep with a 10.5 in (266.7 mm) flange, a 0.565 in (14.4 mm) web and a 0.85 in (21.6 mm) flange, and weighs 116 lb/ft (172.6 kg/m). Area 34.2 in² (22,064 mm²); strong-axis Ix = 4,930 in⁴ (205,202.1 cm⁴), Sx = 329 in³ (5,391.3 cm³), Zx = 378 in³ (6,194.3 cm³).

dDepth
762.0 mm30 in30 in762.0 mm
bfFlange width
266.7 mm10.5 in10.5 in266.7 mm
twWeb thickness
14.4 mm0.565 in0.565 in14.4 mm
tfFlange thickness
21.6 mm0.85 in0.85 in21.6 mm

Drawing

266.7 mm10.5 in762.0 mm30 intf 21.6 mmtf 0.85 intw 14.4 mmtw 0.565 ink 38.1 mmk 1.5 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×116 specifications

dDepth30 in762.0 mm
bfFlange width10.5 in266.7 mm
twWeb thickness0.565 in14.4 mm
tfFlange thickness0.85 in21.6 mm
kDesign value1.5 in38.1 mm
kDetailing value2 1/8 in54.0 mm
k1Detailing value1 1/2 in38.1 mm
WWeight116 lb/ft172.6 kg/m
AArea34.2 in²22,064 mm²
IxMoment of inertia, strong axis4,930 in⁴205,202.1 cm⁴
ZxPlastic modulus, strong axis378 in³6,194.3 cm³
SxSection modulus, strong axis329 in³5,391.3 cm³
rxRadius of gyration, strong axis12 in304.8 mm
IyMoment of inertia, weak axis164 in⁴6,826.2 cm⁴
ZyPlastic modulus, weak axis49.2 in³806.2 cm³
SySection modulus, weak axis31.3 in³512.9 cm³
ryRadius of gyration, weak axis2.19 in55.6 mm
JTorsional constant6.43 in⁴267.64 cm⁴
bf/2tfFlange slenderness6.17
h/twWeb slenderness47.8
Metric designationW760×173

Also known as

W760×173

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.