W33×118 Beam Dimensions & Properties

W Shapes (AISC) · W33: 33 in nominal depth

W33×118 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 32.9 in (835.7 mm) deep with a 11.5 in (292.1 mm) flange, a 0.55 in (14.0 mm) web and a 0.74 in (18.8 mm) flange, and weighs 118 lb/ft (175.6 kg/m). Area 34.7 in² (22,387 mm²); strong-axis Ix = 5,900 in⁴ (245,576.5 cm⁴), Sx = 359 in³ (5,883 cm³), Zx = 415 in³ (6,800.6 cm³).

dDepth
835.7 mm32.9 in32.9 in835.7 mm
bfFlange width
292.1 mm11.5 in11.5 in292.1 mm
twWeb thickness
14.0 mm0.55 in0.55 in14.0 mm
tfFlange thickness
18.8 mm0.74 in0.74 in18.8 mm

Drawing

292.1 mm11.5 in835.7 mm32.9 intf 18.8 mmtf 0.74 intw 14.0 mmtw 0.55 ink 36.6 mmk 1.44 in
Drawn to scale · Dimensions in mmDimensions in inches

W33×118 specifications

dDepth32.9 in835.7 mm
bfFlange width11.5 in292.1 mm
twWeb thickness0.55 in14.0 mm
tfFlange thickness0.74 in18.8 mm
kDesign value1.44 in36.6 mm
kDetailing value2 in50.8 mm
k1Detailing value1 1/2 in38.1 mm
WWeight118 lb/ft175.6 kg/m
AArea34.7 in²22,387 mm²
IxMoment of inertia, strong axis5,900 in⁴245,576.5 cm⁴
ZxPlastic modulus, strong axis415 in³6,800.6 cm³
SxSection modulus, strong axis359 in³5,883 cm³
rxRadius of gyration, strong axis13 in330.2 mm
IyMoment of inertia, weak axis187 in⁴7,783.5 cm⁴
ZyPlastic modulus, weak axis51.3 in³840.7 cm³
SySection modulus, weak axis32.6 in³534.2 cm³
ryRadius of gyration, weak axis2.32 in58.9 mm
JTorsional constant5.3 in⁴220.6 cm⁴
bf/2tfFlange slenderness7.76
h/twWeb slenderness54.5
Metric designationW840×176

Also known as

W840×176

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.