Träger W6×25: Maße und Querschnittswerte
W-Profile (AISC) · W6: 6 in Nennhöhe
W6×25 ist ein AISC-Breitflanschprofil (W6: 6 in Nennhöhe). Es ist 6,38 in (162,1 mm) hoch, mit einem 6,08 in (154,4 mm) breiten Flansch, 0,32 in (8,1 mm) Stegdicke und 0,455 in (11,6 mm) Flanschdicke, und wiegt 25 lb/ft (37,2 kg/m). Fläche 7,34 in² (4.735 mm²); um die starke Achse Ix = 53,4 in⁴ (2.222,7 cm⁴), Sx = 16,7 in³ (273,7 cm³), Zx = 18,9 in³ (309,7 cm³).
- dHöhe
- 162,1 mm6,38 in6,38 in162,1 mm
- bfFlanschbreite
- 154,4 mm6,08 in6,08 in154,4 mm
- twStegdicke
- 8,1 mm0,32 in0,32 in8,1 mm
- tfFlanschdicke
- 11,6 mm0,455 in0,455 in11,6 mm
Zeichnung
Technische Daten W6×25
| dHöhe | 6,38 in162,1 mm |
|---|---|
| bfFlanschbreite | 6,08 in154,4 mm |
| twStegdicke | 0,32 in8,1 mm |
| tfFlanschdicke | 0,455 in11,6 mm |
| kBemessungswert | 0,705 in17,9 mm |
| kDetaillierungswert | 15/16 in23,8 mm |
| k1Detaillierungswert | 9/16 in14,3 mm |
| WGewicht | 25 lb/ft37,2 kg/m |
| AQuerschnittsfläche | 7,34 in²4.735 mm² |
| IxFlächenträgheitsmoment, starke Achse | 53,4 in⁴2.222,7 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 18,9 in³309,7 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 16,7 in³273,7 cm³ |
| rxTrägheitsradius, starke Achse | 2,7 in68,6 mm |
| IyFlächenträgheitsmoment, schwache Achse | 17,1 in⁴711,8 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 8,56 in³140,3 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 5,61 in³91,9 cm³ |
| ryTrägheitsradius, schwache Achse | 1,52 in38,6 mm |
| JTorsionsträgheitsmoment | 0,461 in⁴19,19 cm⁴ |
| bf/2tfFlanschschlankheit | 6,68 |
| h/twStegschlankheit | 15,5 |
| Metrische Bezeichnung | W150×37.1 |
Auch bekannt als
W150×37.1
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.