W6×25 Beam Dimensions & Properties

W Shapes (AISC) · W6: 6 in nominal depth

W6×25 is an AISC wide-flange shape (W6: 6 in nominal depth). It is 6.38 in (162.1 mm) deep with a 6.08 in (154.4 mm) flange, a 0.32 in (8.1 mm) web and a 0.455 in (11.6 mm) flange, and weighs 25 lb/ft (37.2 kg/m). Area 7.34 in² (4,735 mm²); strong-axis Ix = 53.4 in⁴ (2,222.7 cm⁴), Sx = 16.7 in³ (273.7 cm³), Zx = 18.9 in³ (309.7 cm³).

dDepth
162.1 mm6.38 in6.38 in162.1 mm
bfFlange width
154.4 mm6.08 in6.08 in154.4 mm
twWeb thickness
8.1 mm0.32 in0.32 in8.1 mm
tfFlange thickness
11.6 mm0.455 in0.455 in11.6 mm

Drawing

154.4 mm6.08 in162.1 mm6.38 intf 11.6 mmtf 0.455 intw 8.1 mmtw 0.32 ink 17.9 mmk 0.705 in
Drawn to scale · Dimensions in mmDimensions in inches

W6×25 specifications

dDepth6.38 in162.1 mm
bfFlange width6.08 in154.4 mm
twWeb thickness0.32 in8.1 mm
tfFlange thickness0.455 in11.6 mm
kDesign value0.705 in17.9 mm
kDetailing value15/16 in23.8 mm
k1Detailing value9/16 in14.3 mm
WWeight25 lb/ft37.2 kg/m
AArea7.34 in²4,735 mm²
IxMoment of inertia, strong axis53.4 in⁴2,222.7 cm⁴
ZxPlastic modulus, strong axis18.9 in³309.7 cm³
SxSection modulus, strong axis16.7 in³273.7 cm³
rxRadius of gyration, strong axis2.7 in68.6 mm
IyMoment of inertia, weak axis17.1 in⁴711.8 cm⁴
ZyPlastic modulus, weak axis8.56 in³140.3 cm³
SySection modulus, weak axis5.61 in³91.9 cm³
ryRadius of gyration, weak axis1.52 in38.6 mm
JTorsional constant0.461 in⁴19.19 cm⁴
bf/2tfFlange slenderness6.68
h/twWeb slenderness15.5
Metric designationW150×37.1

Also known as

W150×37.1

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.