Träger W10×26: Maße und Querschnittswerte
W-Profile (AISC) · W10: 10 in Nennhöhe
W10×26 ist ein AISC-Breitflanschprofil (W10: 10 in Nennhöhe). Es ist 10,3 in (261,6 mm) hoch, mit einem 5,77 in (146,6 mm) breiten Flansch, 0,26 in (6,6 mm) Stegdicke und 0,44 in (11,2 mm) Flanschdicke, und wiegt 26 lb/ft (38,7 kg/m). Fläche 7,61 in² (4.910 mm²); um die starke Achse Ix = 144 in⁴ (5.993,7 cm⁴), Sx = 27,9 in³ (457,2 cm³), Zx = 31,3 in³ (512,9 cm³).
- dHöhe
- 261,6 mm10,3 in10,3 in261,6 mm
- bfFlanschbreite
- 146,6 mm5,77 in5,77 in146,6 mm
- twStegdicke
- 6,6 mm0,26 in0,26 in6,6 mm
- tfFlanschdicke
- 11,2 mm0,44 in0,44 in11,2 mm
Zeichnung
Technische Daten W10×26
| dHöhe | 10,3 in261,6 mm |
|---|---|
| bfFlanschbreite | 5,77 in146,6 mm |
| twStegdicke | 0,26 in6,6 mm |
| tfFlanschdicke | 0,44 in11,2 mm |
| kBemessungswert | 0,74 in18,8 mm |
| kDetaillierungswert | 1 1/16 in27,0 mm |
| k1Detaillierungswert | 11/16 in17,5 mm |
| WGewicht | 26 lb/ft38,7 kg/m |
| AQuerschnittsfläche | 7,61 in²4.910 mm² |
| IxFlächenträgheitsmoment, starke Achse | 144 in⁴5.993,7 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 31,3 in³512,9 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 27,9 in³457,2 cm³ |
| rxTrägheitsradius, starke Achse | 4,35 in110,5 mm |
| IyFlächenträgheitsmoment, schwache Achse | 14,1 in⁴586,9 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 7,5 in³122,9 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 4,89 in³80,1 cm³ |
| ryTrägheitsradius, schwache Achse | 1,36 in34,5 mm |
| JTorsionsträgheitsmoment | 0,402 in⁴16,73 cm⁴ |
| bf/2tfFlanschschlankheit | 6,56 |
| h/twStegschlankheit | 34 |
| Metrische Bezeichnung | W250×38.5 |
Auch bekannt als
W250×38.5
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.