W8×35 Beam Dimensions & Properties
W Shapes (AISC) · W8: 8 in nominal depth
W8×35 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 8.12 in (206.2 mm) deep with a 8.02 in (203.7 mm) flange, a 0.31 in (7.9 mm) web and a 0.495 in (12.6 mm) flange, and weighs 35 lb/ft (52.1 kg/m). Area 10.3 in² (6,645 mm²); strong-axis Ix = 127 in⁴ (5,286.1 cm⁴), Sx = 31.2 in³ (511.3 cm³), Zx = 34.7 in³ (568.6 cm³).
- dDepth
- 206.2 mm8.12 in8.12 in206.2 mm
- bfFlange width
- 203.7 mm8.02 in8.02 in203.7 mm
- twWeb thickness
- 7.9 mm0.31 in0.31 in7.9 mm
- tfFlange thickness
- 12.6 mm0.495 in0.495 in12.6 mm
Drawing
W8×35 specifications
| dDepth | 8.12 in206.2 mm |
|---|---|
| bfFlange width | 8.02 in203.7 mm |
| twWeb thickness | 0.31 in7.9 mm |
| tfFlange thickness | 0.495 in12.6 mm |
| kDesign value | 0.889 in22.6 mm |
| kDetailing value | 1 3/16 in30.2 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 35 lb/ft52.1 kg/m |
| AArea | 10.3 in²6,645 mm² |
| IxMoment of inertia, strong axis | 127 in⁴5,286.1 cm⁴ |
| ZxPlastic modulus, strong axis | 34.7 in³568.6 cm³ |
| SxSection modulus, strong axis | 31.2 in³511.3 cm³ |
| rxRadius of gyration, strong axis | 3.51 in89.2 mm |
| IyMoment of inertia, weak axis | 42.6 in⁴1,773.1 cm⁴ |
| ZyPlastic modulus, weak axis | 16.1 in³263.8 cm³ |
| SySection modulus, weak axis | 10.6 in³173.7 cm³ |
| ryRadius of gyration, weak axis | 2.03 in51.6 mm |
| JTorsional constant | 0.769 in⁴32.01 cm⁴ |
| bf/2tfFlange slenderness | 8.1 |
| h/twWeb slenderness | 20.5 |
| Metric designation | W200×52 |
Also known as
W200×52
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.