Module 1.25 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 1.25 gear has a circular pitch of 3.927 mm (0.1546 in) and a whole tooth depth of 2.8125 mm (0.1107 in), addendum 1.25 mm (0.0492 in), dedendum 1.5625 mm (0.0615 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 1.25 mm. The equivalent diametral pitch is 20.32. The nearest inch gear, 20 DP, does not mesh with it.

mModule
1.25 mm0.0492 in0.0492 in1.25 mm
pCircular pitch (πm)
3.927 mm0.1546 in0.1546 in3.927 mm
hWhole depth (2.25 m)
2.8125 mm0.1107 in0.1107 in2.8125 mm
DPEquivalent diametral pitch (25.4/m)
20.32

Drawing

Pitch linep 3.927 mmp 0.1546 ins 1.964 mms 0.0773 inh 2.8125 mmh 0.1107 inha 1.25 mmha 0.0492 inhf 1.5625 mmhf 0.0615 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 1.25 specifications

mModule1.25 mm0.0492 in
SeriesI
pCircular pitch (πm)3.927 mm0.1546 in
sTooth thickness (πm/2)1.964 mm0.0773 in
haAddendum (1 m)1.25 mm0.0492 in
hfDedendum (1.25 m)1.5625 mm0.0615 in
hWhole depth (2.25 m)2.8125 mm0.1107 in
cBottom clearance (0.25 m)0.3125 mm0.0123 in
DPEquivalent diametral pitch (25.4/m)20.32
Nearest standard DP20

Also known as

M1.25MOD1.25

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.