Träger W10×100: Maße und Querschnittswerte
W-Profile (AISC) · W10: 10 in Nennhöhe
W10×100 ist ein AISC-Breitflanschprofil (W10: 10 in Nennhöhe). Es ist 11,1 in (281,9 mm) hoch, mit einem 10,3 in (261,6 mm) breiten Flansch, 0,68 in (17,3 mm) Stegdicke und 1,12 in (28,4 mm) Flanschdicke, und wiegt 100 lb/ft (148,8 kg/m). Fläche 29,3 in² (18.903 mm²); um die starke Achse Ix = 623 in⁴ (25.931,2 cm⁴), Sx = 112 in³ (1.835,4 cm³), Zx = 130 in³ (2.130,3 cm³).
- dHöhe
- 281,9 mm11,1 in11,1 in281,9 mm
- bfFlanschbreite
- 261,6 mm10,3 in10,3 in261,6 mm
- twStegdicke
- 17,3 mm0,68 in0,68 in17,3 mm
- tfFlanschdicke
- 28,4 mm1,12 in1,12 in28,4 mm
Zeichnung
Technische Daten W10×100
| dHöhe | 11,1 in281,9 mm |
|---|---|
| bfFlanschbreite | 10,3 in261,6 mm |
| twStegdicke | 0,68 in17,3 mm |
| tfFlanschdicke | 1,12 in28,4 mm |
| kBemessungswert | 1,62 in41,1 mm |
| kDetaillierungswert | 1 13/16 in46,0 mm |
| k1Detaillierungswert | 1 in25,4 mm |
| WGewicht | 100 lb/ft148,8 kg/m |
| AQuerschnittsfläche | 29,3 in²18.903 mm² |
| IxFlächenträgheitsmoment, starke Achse | 623 in⁴25.931,2 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 130 in³2.130,3 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 112 in³1.835,4 cm³ |
| rxTrägheitsradius, starke Achse | 4,6 in116,8 mm |
| IyFlächenträgheitsmoment, schwache Achse | 207 in⁴8.616 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 61 in³999,6 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 40 in³655,5 cm³ |
| ryTrägheitsradius, schwache Achse | 2,65 in67,3 mm |
| JTorsionsträgheitsmoment | 10,9 in⁴453,69 cm⁴ |
| bf/2tfFlanschschlankheit | 4,62 |
| h/twStegschlankheit | 11,6 |
| Metrische Bezeichnung | W250×149 |
Auch bekannt als
W250×149
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.