W10×100 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×100 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 11.1 in (281.9 mm) deep with a 10.3 in (261.6 mm) flange, a 0.68 in (17.3 mm) web and a 1.12 in (28.4 mm) flange, and weighs 100 lb/ft (148.8 kg/m). Area 29.3 in² (18,903 mm²); strong-axis Ix = 623 in⁴ (25,931.2 cm⁴), Sx = 112 in³ (1,835.4 cm³), Zx = 130 in³ (2,130.3 cm³).

dDepth
281.9 mm11.1 in11.1 in281.9 mm
bfFlange width
261.6 mm10.3 in10.3 in261.6 mm
twWeb thickness
17.3 mm0.68 in0.68 in17.3 mm
tfFlange thickness
28.4 mm1.12 in1.12 in28.4 mm

Drawing

261.6 mm10.3 in281.9 mm11.1 intf 28.4 mmtf 1.12 intw 17.3 mmtw 0.68 ink 41.1 mmk 1.62 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×100 specifications

dDepth11.1 in281.9 mm
bfFlange width10.3 in261.6 mm
twWeb thickness0.68 in17.3 mm
tfFlange thickness1.12 in28.4 mm
kDesign value1.62 in41.1 mm
kDetailing value1 13/16 in46.0 mm
k1Detailing value1 in25.4 mm
WWeight100 lb/ft148.8 kg/m
AArea29.3 in²18,903 mm²
IxMoment of inertia, strong axis623 in⁴25,931.2 cm⁴
ZxPlastic modulus, strong axis130 in³2,130.3 cm³
SxSection modulus, strong axis112 in³1,835.4 cm³
rxRadius of gyration, strong axis4.6 in116.8 mm
IyMoment of inertia, weak axis207 in⁴8,616 cm⁴
ZyPlastic modulus, weak axis61 in³999.6 cm³
SySection modulus, weak axis40 in³655.5 cm³
ryRadius of gyration, weak axis2.65 in67.3 mm
JTorsional constant10.9 in⁴453.69 cm⁴
bf/2tfFlange slenderness4.62
h/twWeb slenderness11.6
Metric designationW250×149

Also known as

W250×149

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.