Träger W30×99: Maße und Querschnittswerte
W-Profile (AISC) · W30: 30 in Nennhöhe
W30×99 ist ein AISC-Breitflanschprofil (W30: 30 in Nennhöhe). Es ist 29,7 in (754,4 mm) hoch, mit einem 10,5 in (266,7 mm) breiten Flansch, 0,52 in (13,2 mm) Stegdicke und 0,67 in (17,0 mm) Flanschdicke, und wiegt 99 lb/ft (147,3 kg/m). Fläche 29 in² (18.710 mm²); um die starke Achse Ix = 3.990 in⁴ (166.076,3 cm⁴), Sx = 269 in³ (4.408,1 cm³), Zx = 312 in³ (5.112,8 cm³).
- dHöhe
- 754,4 mm29,7 in29,7 in754,4 mm
- bfFlanschbreite
- 266,7 mm10,5 in10,5 in266,7 mm
- twStegdicke
- 13,2 mm0,52 in0,52 in13,2 mm
- tfFlanschdicke
- 17,0 mm0,67 in0,67 in17,0 mm
Zeichnung
Technische Daten W30×99
| dHöhe | 29,7 in754,4 mm |
|---|---|
| bfFlanschbreite | 10,5 in266,7 mm |
| twStegdicke | 0,52 in13,2 mm |
| tfFlanschdicke | 0,67 in17,0 mm |
| kBemessungswert | 1,32 in33,5 mm |
| kDetaillierungswert | 2 in50,8 mm |
| k1Detaillierungswert | 1 1/2 in38,1 mm |
| WGewicht | 99 lb/ft147,3 kg/m |
| AQuerschnittsfläche | 29 in²18.710 mm² |
| IxFlächenträgheitsmoment, starke Achse | 3.990 in⁴166.076,3 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 312 in³5.112,8 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 269 in³4.408,1 cm³ |
| rxTrägheitsradius, starke Achse | 11,7 in297,2 mm |
| IyFlächenträgheitsmoment, schwache Achse | 128 in⁴5.327,8 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 38,6 in³632,5 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 24,5 in³401,5 cm³ |
| ryTrägheitsradius, schwache Achse | 2,1 in53,3 mm |
| JTorsionsträgheitsmoment | 3,77 in⁴156,92 cm⁴ |
| bf/2tfFlanschschlankheit | 7,8 |
| h/twStegschlankheit | 51,9 |
| Metrische Bezeichnung | W760×147 |
Auch bekannt als
W760×147
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.