Träger W21×101: Maße und Querschnittswerte
W-Profile (AISC) · W21: 21 in Nennhöhe
W21×101 ist ein AISC-Breitflanschprofil (W21: 21 in Nennhöhe). Es ist 21,4 in (543,6 mm) hoch, mit einem 12,3 in (312,4 mm) breiten Flansch, 0,5 in (12,7 mm) Stegdicke und 0,8 in (20,3 mm) Flanschdicke, und wiegt 101 lb/ft (150,3 kg/m). Fläche 29,8 in² (19.226 mm²); um die starke Achse Ix = 2.420 in⁴ (100.728 cm⁴), Sx = 227 in³ (3.719,9 cm³), Zx = 253 in³ (4.145,9 cm³).
- dHöhe
- 543,6 mm21,4 in21,4 in543,6 mm
- bfFlanschbreite
- 312,4 mm12,3 in12,3 in312,4 mm
- twStegdicke
- 12,7 mm0,5 in0,5 in12,7 mm
- tfFlanschdicke
- 20,3 mm0,8 in0,8 in20,3 mm
Zeichnung
Technische Daten W21×101
| dHöhe | 21,4 in543,6 mm |
|---|---|
| bfFlanschbreite | 12,3 in312,4 mm |
| twStegdicke | 0,5 in12,7 mm |
| tfFlanschdicke | 0,8 in20,3 mm |
| kBemessungswert | 1,3 in33,0 mm |
| kDetaillierungswert | 2 1/16 in52,4 mm |
| k1Detaillierungswert | 1 7/16 in36,5 mm |
| WGewicht | 101 lb/ft150,3 kg/m |
| AQuerschnittsfläche | 29,8 in²19.226 mm² |
| IxFlächenträgheitsmoment, starke Achse | 2.420 in⁴100.728 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 253 in³4.145,9 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 227 in³3.719,9 cm³ |
| rxTrägheitsradius, starke Achse | 9,02 in229,1 mm |
| IyFlächenträgheitsmoment, schwache Achse | 248 in⁴10.322,5 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 61,7 in³1.011,1 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 40,3 in³660,4 cm³ |
| ryTrägheitsradius, schwache Achse | 2,89 in73,4 mm |
| JTorsionsträgheitsmoment | 5,21 in⁴216,86 cm⁴ |
| bf/2tfFlanschschlankheit | 7,68 |
| h/twStegschlankheit | 37,5 |
| Metrische Bezeichnung | W530×150 |
Auch bekannt als
W530×150
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.