W10×26 Beam Dimensions & Properties
W Shapes (AISC) · W10: 10 in nominal depth
W10×26 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.3 in (261.6 mm) deep with a 5.77 in (146.6 mm) flange, a 0.26 in (6.6 mm) web and a 0.44 in (11.2 mm) flange, and weighs 26 lb/ft (38.7 kg/m). Area 7.61 in² (4,910 mm²); strong-axis Ix = 144 in⁴ (5,993.7 cm⁴), Sx = 27.9 in³ (457.2 cm³), Zx = 31.3 in³ (512.9 cm³).
- dDepth
- 261.6 mm10.3 in10.3 in261.6 mm
- bfFlange width
- 146.6 mm5.77 in5.77 in146.6 mm
- twWeb thickness
- 6.6 mm0.26 in0.26 in6.6 mm
- tfFlange thickness
- 11.2 mm0.44 in0.44 in11.2 mm
Drawing
W10×26 specifications
| dDepth | 10.3 in261.6 mm |
|---|---|
| bfFlange width | 5.77 in146.6 mm |
| twWeb thickness | 0.26 in6.6 mm |
| tfFlange thickness | 0.44 in11.2 mm |
| kDesign value | 0.74 in18.8 mm |
| kDetailing value | 1 1/16 in27.0 mm |
| k1Detailing value | 11/16 in17.5 mm |
| WWeight | 26 lb/ft38.7 kg/m |
| AArea | 7.61 in²4,910 mm² |
| IxMoment of inertia, strong axis | 144 in⁴5,993.7 cm⁴ |
| ZxPlastic modulus, strong axis | 31.3 in³512.9 cm³ |
| SxSection modulus, strong axis | 27.9 in³457.2 cm³ |
| rxRadius of gyration, strong axis | 4.35 in110.5 mm |
| IyMoment of inertia, weak axis | 14.1 in⁴586.9 cm⁴ |
| ZyPlastic modulus, weak axis | 7.5 in³122.9 cm³ |
| SySection modulus, weak axis | 4.89 in³80.1 cm³ |
| ryRadius of gyration, weak axis | 1.36 in34.5 mm |
| JTorsional constant | 0.402 in⁴16.73 cm⁴ |
| bf/2tfFlange slenderness | 6.56 |
| h/twWeb slenderness | 34 |
| Metric designation | W250×38.5 |
Also known as
W250×38.5
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.