W10×30 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×30 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.5 in (266.7 mm) deep with a 5.81 in (147.6 mm) flange, a 0.3 in (7.6 mm) web and a 0.51 in (13.0 mm) flange, and weighs 30 lb/ft (44.6 kg/m). Area 8.84 in² (5,703 mm²); strong-axis Ix = 170 in⁴ (7,075.9 cm⁴), Sx = 32.4 in³ (530.9 cm³), Zx = 36.6 in³ (599.8 cm³).

dDepth
266.7 mm10.5 in10.5 in266.7 mm
bfFlange width
147.6 mm5.81 in5.81 in147.6 mm
twWeb thickness
7.6 mm0.3 in0.3 in7.6 mm
tfFlange thickness
13.0 mm0.51 in0.51 in13.0 mm

Drawing

147.6 mm5.81 in266.7 mm10.5 intf 13.0 mmtf 0.51 intw 7.6 mmtw 0.3 ink 20.6 mmk 0.81 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×30 specifications

dDepth10.5 in266.7 mm
bfFlange width5.81 in147.6 mm
twWeb thickness0.3 in7.6 mm
tfFlange thickness0.51 in13.0 mm
kDesign value0.81 in20.6 mm
kDetailing value1 1/8 in28.6 mm
k1Detailing value11/16 in17.5 mm
WWeight30 lb/ft44.6 kg/m
AArea8.84 in²5,703 mm²
IxMoment of inertia, strong axis170 in⁴7,075.9 cm⁴
ZxPlastic modulus, strong axis36.6 in³599.8 cm³
SxSection modulus, strong axis32.4 in³530.9 cm³
rxRadius of gyration, strong axis4.38 in111.3 mm
IyMoment of inertia, weak axis16.7 in⁴695.1 cm⁴
ZyPlastic modulus, weak axis8.84 in³144.9 cm³
SySection modulus, weak axis5.75 in³94.2 cm³
ryRadius of gyration, weak axis1.37 in34.8 mm
JTorsional constant0.622 in⁴25.89 cm⁴
bf/2tfFlange slenderness5.7
h/twWeb slenderness29.5
Metric designationW250×44.8

Also known as

W250×44.8

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.