W21×101 Beam Dimensions & Properties
W Shapes (AISC) · W21: 21 in nominal depth
W21×101 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21.4 in (543.6 mm) deep with a 12.3 in (312.4 mm) flange, a 0.5 in (12.7 mm) web and a 0.8 in (20.3 mm) flange, and weighs 101 lb/ft (150.3 kg/m). Area 29.8 in² (19,226 mm²); strong-axis Ix = 2,420 in⁴ (100,728 cm⁴), Sx = 227 in³ (3,719.9 cm³), Zx = 253 in³ (4,145.9 cm³).
- dDepth
- 543.6 mm21.4 in21.4 in543.6 mm
- bfFlange width
- 312.4 mm12.3 in12.3 in312.4 mm
- twWeb thickness
- 12.7 mm0.5 in0.5 in12.7 mm
- tfFlange thickness
- 20.3 mm0.8 in0.8 in20.3 mm
Drawing
W21×101 specifications
| dDepth | 21.4 in543.6 mm |
|---|---|
| bfFlange width | 12.3 in312.4 mm |
| twWeb thickness | 0.5 in12.7 mm |
| tfFlange thickness | 0.8 in20.3 mm |
| kDesign value | 1.3 in33.0 mm |
| kDetailing value | 2 1/16 in52.4 mm |
| k1Detailing value | 1 7/16 in36.5 mm |
| WWeight | 101 lb/ft150.3 kg/m |
| AArea | 29.8 in²19,226 mm² |
| IxMoment of inertia, strong axis | 2,420 in⁴100,728 cm⁴ |
| ZxPlastic modulus, strong axis | 253 in³4,145.9 cm³ |
| SxSection modulus, strong axis | 227 in³3,719.9 cm³ |
| rxRadius of gyration, strong axis | 9.02 in229.1 mm |
| IyMoment of inertia, weak axis | 248 in⁴10,322.5 cm⁴ |
| ZyPlastic modulus, weak axis | 61.7 in³1,011.1 cm³ |
| SySection modulus, weak axis | 40.3 in³660.4 cm³ |
| ryRadius of gyration, weak axis | 2.89 in73.4 mm |
| JTorsional constant | 5.21 in⁴216.86 cm⁴ |
| bf/2tfFlange slenderness | 7.68 |
| h/twWeb slenderness | 37.5 |
| Metric designation | W530×150 |
Also known as
W530×150
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.