W30×99 Beam Dimensions & Properties
W Shapes (AISC) · W30: 30 in nominal depth
W30×99 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 29.7 in (754.4 mm) deep with a 10.5 in (266.7 mm) flange, a 0.52 in (13.2 mm) web and a 0.67 in (17.0 mm) flange, and weighs 99 lb/ft (147.3 kg/m). Area 29 in² (18,710 mm²); strong-axis Ix = 3,990 in⁴ (166,076.3 cm⁴), Sx = 269 in³ (4,408.1 cm³), Zx = 312 in³ (5,112.8 cm³).
- dDepth
- 754.4 mm29.7 in29.7 in754.4 mm
- bfFlange width
- 266.7 mm10.5 in10.5 in266.7 mm
- twWeb thickness
- 13.2 mm0.52 in0.52 in13.2 mm
- tfFlange thickness
- 17.0 mm0.67 in0.67 in17.0 mm
Drawing
W30×99 specifications
| dDepth | 29.7 in754.4 mm |
|---|---|
| bfFlange width | 10.5 in266.7 mm |
| twWeb thickness | 0.52 in13.2 mm |
| tfFlange thickness | 0.67 in17.0 mm |
| kDesign value | 1.32 in33.5 mm |
| kDetailing value | 2 in50.8 mm |
| k1Detailing value | 1 1/2 in38.1 mm |
| WWeight | 99 lb/ft147.3 kg/m |
| AArea | 29 in²18,710 mm² |
| IxMoment of inertia, strong axis | 3,990 in⁴166,076.3 cm⁴ |
| ZxPlastic modulus, strong axis | 312 in³5,112.8 cm³ |
| SxSection modulus, strong axis | 269 in³4,408.1 cm³ |
| rxRadius of gyration, strong axis | 11.7 in297.2 mm |
| IyMoment of inertia, weak axis | 128 in⁴5,327.8 cm⁴ |
| ZyPlastic modulus, weak axis | 38.6 in³632.5 cm³ |
| SySection modulus, weak axis | 24.5 in³401.5 cm³ |
| ryRadius of gyration, weak axis | 2.1 in53.3 mm |
| JTorsional constant | 3.77 in⁴156.92 cm⁴ |
| bf/2tfFlange slenderness | 7.8 |
| h/twWeb slenderness | 51.9 |
| Metric designation | W760×147 |
Also known as
W760×147
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.