Ajustement K7/h6 : tolérances
Ajustements ISO · Système de l'arbre normal (arbre h)
K7/h6 : ajustement Incertain ; Système de l'arbre normal (arbre h). À ⌀25 mm, l'alésage est à +6 / −15 µm, l'arbre à 0 / −13 µm, ce qui donne un jeu maximal de 19 µm et un jeu minimal de −15 µm (négatif = serrage). Le tableau ci-dessous indique les écarts pour toutes les plages de dimensions ISO jusqu'à 500 mm.
- Type d'ajustement
- Incertain
- Jeu max. à ⌀25 mm
- 19 µm0,00075 in0,00075 in19 µm
- Jeu min. à ⌀25 mm (− = serrage)
- −15 µm−0,00059 in−0,00059 in−15 µm
Plan
Caractéristiques : K7/h6
| Type d'ajustement | Incertain |
|---|---|
| Écarts de l'alésage à ⌀25 mm (µm) | +6 / −15 |
| Écarts de l'arbre à ⌀25 mm (µm) | 0 / −13 |
| Jeu max. à ⌀25 mm | 19 µm0,00075 in |
| Jeu min. à ⌀25 mm (− = serrage) | −15 µm−0,00059 in |
Écarts K7/h6 pour chaque plage de dimensions (µm)
| Dimension (mm) | Alésage ES / EI | Arbre es / ei | Jeu max. | Jeu min. | Type |
|---|---|---|---|---|---|
| ≤ 3 | 0 / −10 | 0 / −6 | +6 | −10 | incertain |
| 3–6 | +3 / −9 | 0 / −8 | +11 | −9 | incertain |
| 6–10 | +5 / −10 | 0 / −9 | +14 | −10 | incertain |
| 10–18 | +6 / −12 | 0 / −11 | +17 | −12 | incertain |
| 18–30 | +6 / −15 | 0 / −13 | +19 | −15 | incertain |
| 30–50 | +7 / −18 | 0 / −16 | +23 | −18 | incertain |
| 50–80 | +9 / −21 | 0 / −19 | +28 | −21 | incertain |
| 80–120 | +10 / −25 | 0 / −22 | +32 | −25 | incertain |
| 120–180 | +12 / −28 | 0 / −25 | +37 | −28 | incertain |
| 180–250 | +13 / −33 | 0 / −29 | +42 | −33 | incertain |
| 250–315 | +16 / −36 | 0 / −32 | +48 | −36 | incertain |
| 315–400 | +17 / −40 | 0 / −36 | +53 | −40 | incertain |
| 400–500 | +18 / −45 | 0 / −40 | +58 | −45 | incertain |
Ajustement incertain à arbre normal : bagues extérieures de roulements ou bagues dans les logements, maintenues fermement mais démontables.
Autres ajustements du même type (Incertain)
Tous les ajustements ISO
Sources
- ISO 286-1:2010, Geometrical product specifications (GPS): ISO code system for tolerances on linear sizes, Part 1: Basis of tolerances, deviations and fits
- ISO 286-2:2010, Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- ANSI B4.2-1978 (R2020): Preferred metric limits and fits
Valeurs vérifiées pour la dernière fois d'après ces sources le 15 novembre 2026. · Comment nous vérifions les données
Valeurs de référence pour l'étude et l'identification. Avant toute fabrication, confirmez les cotes critiques sur le plan du fabricant ou dans l'édition en vigueur de la norme.