Corrugated Box Styles (FEFCO Codes) and Flute Sizes: RSC 0201, 0203, 0427, A/B/C/E/F Flutes

Corrugated boxes are specified by style (FEFCO code), flute and board grade. The standard shipping carton is the 0201 regular slotted container (RSC); the most common board is C flute, about 4 mm thick, or BC double wall, about 7 mm. In the US, grade is given as ECT (e.g. 32 ECT) or burst strength (e.g. 200 lb Mullen).

15 sizesChecked 2026-11-156 sources
0200 (HSC)0201 (RSC)0202 (OSC)0203 (FOL)Flute profiles (to scale, ×12)A flute · 4.8 mmC flute · 4 mmB flute · 3.2 mmE flute · 1.6 mmF flute · 0.8 mm
Top: flat blanks of the same box in four slotted styles (light: flaps; left: glue flap). Bottom: flute profiles to scale, ×12.Proportions shown, not to scale

Size chartSort by any column, or filter to find a row

15 of 15
Style / fluteStyleFlapstBoard thickness (typical)mminFlutes per footTypical use
Box styles (FEFCO code)
FEFCO 0201RSC (regular slotted container)outer flaps = ½ width, meet at the centre——the standard shipping carton
FEFCO 0200HSC (half slotted container)flaps on one end only (open top)——trays with a separate lid, display, inner boxes
FEFCO 0202OSC (overlap slotted container)outer flaps overlap partly——long narrow boxes, more stacking strength at the top
FEFCO 0203FOL (full overlap slotted container)outer flaps = full width, overlap completely——heavy or rough handling; double board on top and bottom
FEFCO 0204CSSC (centre special slotted container)inner and outer flaps both meet at the centre——full double layer on top and bottom with flat surface
FEFCO 0301Telescope box: tray with a separate lidlid slides over the base——shoe boxes, gift boxes, archive boxes
FEFCO 0427Die-cut folder: roll-end tuck-front mailerlid with tuck flap and dust flaps, no tape needed——e-commerce and subscription boxes
FEFCO 0711Ready-glued box with crash-lock (auto) bottombottom locks when the box is opened; top flaps as 0201——fast hand packing
Flutes and board
A flute——4.80.18930–36cushioning, stacking strength; less common today
C flute——4.00.15736–42most common for shipping boxes
B flute——3.20.12644–50die-cut boxes, retail packs, good printing and crush resistance
E flute——1.60.06386–94mailers, retail and folding-carton replacements, fine printing
F flute——0.80.031121–129small retail boxes, cosmetics
BC double wall——7.00.276—heavy goods, export, stacking
EB double wall——4.80.189—strong boxes with a printable outer face

How a box is specified

Dimensions of a corrugated box are inside dimensions, in the order length × width × depth, where length and width are the opening (length the longer side) and depth is the height from the opening. A 12 × 10 × 8 in RSC opens 12 × 10 in and is 8 in deep. Outside dimensions are larger by about two board thicknesses per side.

The FEFCO code (also ESBO, the same catalogue) is four digits: the first two are the series (02 slotted boxes, 03 telescope boxes, 04 folders and trays, 05 slides, 06 rigid boxes, 07 ready-glued boxes, 09 interior fittings) and the last two the design. Quote the code with the board and dimensions and any box maker knows what you mean.

Board: single wall (one fluted layer between two liners), double wall (two flutes, e.g. BC) or triple wall. The flute letter names the wave size, not its order of thickness: A is the largest, then C, B, E and F. The letters were assigned in the order the profiles were introduced.

About Box Styles & Flutes

The 0201 RSC uses board most efficiently: the blank is a rectangle, all four flaps are the same length (half the box width) and the outer flaps meet in the middle. It closes with tape or glue. For heavier contents use 0203 (full-overlap flaps, a double layer of board top and bottom) or a stronger board rather than a different size.

For e-commerce, the die-cut 0427 mailer is the common 'subscription box': a tray with a hinged lid, tuck flap and dust flaps, usually in E or B flute, closing without tape. It costs more per box than an RSC because it needs a cutting die, but it opens neatly and prints well.

Flute choice trades thickness (cushioning and stacking strength) against printability and crush resistance. C flute is the general shipping flute; B flute is stiffer flat and better for die-cut boxes; E and F flute (micro flutes) replace folding cartons where a fine print is needed.

ECT and Mullen (burst) ratings

US boxes carry a box maker's certificate stamped on a flap, stating either the edge crush test (ECT, lb per inch) or the burst strength (Mullen, lb/in²) and the size and gross weight limits. ECT predicts stacking strength and is the usual grade today; Mullen measures resistance to puncture and rough handling. The pairs below are the classic equivalents from the former Rule 41 / Item 222, with the maximum box weight and size (L + W + D) each grade was allowed.

BoardBurst (Mullen)ECTMax. box weightMax. L + W + D
Single wall125 lb23 ECT20 lb40 in
Single wall150 lb26 ECT35 lb50 in
Single wall175 lb29 ECT50 lb60 in
Single wall200 lb32 ECT65 lb75 in
Single wall250 lb40 ECT80 lb85 in
Single wall275 lb44 ECT95 lb95 in
Double wall200 lb42 ECT80 lb–
Double wall275 lb48 ECT100 lb–
Double wall350 lb51 ECT120 lb–
Double wall400 lb61 ECT140 lb–
Double wall500 lb71 ECT160 lb–

Box series in the FEFCO code

The first two digits of the code give the construction.

SeriesConstructionExamples
01Rolls and sheets (not boxes)0110 single-face roll
02Slotted boxes: one piece, glued or taped joint, top and bottom flaps0200, 0201, 0202, 0203, 0204
03Telescope boxes: lid and base0301, 0310
04Folders and trays: one piece, no joint, folded0421, 0427
05Slide boxes: sleeve and drawer0501, 0510
06Rigid boxes: two end pieces and a body0601
07Ready-glued boxes: ship flat, erect in one move0711, 0713
09Interior fittings: pads, partitions, liners0900, 0933

Questions

What does RSC mean?

Regular slotted container, FEFCO 0201: the standard shipping box. All flaps are the same length, half the box width, so the outer flaps meet at the centre.

What is the thickness of corrugated cardboard?

Typical single wall: F flute 0.8 mm, E flute 1.6 mm, B flute 3.2 mm, C flute 4 mm, A flute 4.8 mm. Double wall BC is about 7 mm (1/4 in), EB about 4.8 mm.

What is the difference between 32 ECT and 200 lb test?

Both are common single-wall grades. 32 ECT rates edge crush (stacking strength) at 32 lb per inch; 200 lb test rates burst strength at 200 lb/in². They were treated as equivalent, for boxes up to 65 lb and 75 in L + W + D.

What is a FEFCO 0427 box?

A die-cut, one-piece mailer box with a hinged lid, tuck front and dust flaps: the usual e-commerce or subscription box. It closes without tape.

Are box dimensions inside or outside?

Inside, in the order length × width × depth, with length and width being the opening. Outside dimensions add about two board thicknesses: roughly 1/4 in for single wall and 1/2 in for double wall.

Which flute is strongest?

For stacking, the thicker flutes (A and C) and double wall (BC). For flat crush and puncture resistance, B flute. Strength also depends on the liner paper weight, so compare ECT ratings rather than flute letters.

Sources

  1. FEFCO / ESBO: International Fibreboard Case Code (12th edition)
  2. Fibre Box Association: Fibre Box Handbook (flutes, ECT, burst)
  3. TAPPI T 811: Edgewise compressive strength of corrugated fibreboard (ECT)
  4. TAPPI T 810: Bursting strength of corrugated board (Mullen)
  5. Spicers Canada: Corrugated Box Guide 2024 (Mullen / ECT / max. load)
  6. Uline: Box strength guide (Mullen / ECT and the former Rule 41 limits)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.