Pencil Grade Chart: 9H to 9B, HB, F and Mechanical Lead Sizes

Pencil grades run from 9H (hardest, palest line) through H, F, HB, B to 9B (softest, blackest). H stands for hard, B for black, F for fine (a point between H and HB). A US #2 pencil is HB. The scale is an order, not a measurement: a 2B from one maker can be as dark as a 3B from another.

30 grades and sizesChecked 2026-11-154 sources
9H8H7H6H5H4H3H2HHFHBB2B3B4B5B6B7B8B9Bhard (H)soft, black (B)F · HB
From 9H (hard, light) to 9B (soft, dark). Tones are illustrative: actual darkness varies by brand, paper and pressure.Proportions shown, not to scale

Size chartSort by any column, or filter to find a row

30 of 30
GradePosition (1 = hardest)US numberNominal lead diametermminTypical use
Hardness grades (hard → soft)
9H1——Very hard: technical drawing on film, marking stone and metal, faint guide lines
8H2——Very hard: technical drawing on film, marking stone and metal, faint guide lines
7H3——Very hard: technical drawing on film, marking stone and metal, faint guide lines
6H4——Very hard: technical drawing on film, marking stone and metal, faint guide lines
5H5——Hard: drafting, layout lines, light construction lines that erase cleanly
4H6——Hard: drafting, layout lines, light construction lines that erase cleanly
3H7——Hard: drafting, layout lines, light construction lines that erase cleanly
2H8#4—Hard: drafting, layout lines, light construction lines that erase cleanly
H9#3—Medium: everyday writing, exam answer sheets (HB), general sketching
F10#2½—Medium: everyday writing, exam answer sheets (HB), general sketching
HB11#2—Medium: everyday writing, exam answer sheets (HB), general sketching
B12#1—Soft: sketching, shading, bold writing
2B13#0—Soft: sketching, shading, bold writing
3B14——Soft: sketching, shading, bold writing
4B15——Very soft: dark shading, tonal drawing, smudging and blending
5B16——Very soft: dark shading, tonal drawing, smudging and blending
6B17——Very soft: dark shading, tonal drawing, smudging and blending
7B18——Very soft: dark shading, tonal drawing, smudging and blending
8B19——Very soft: dark shading, tonal drawing, smudging and blending
9B20——Very soft: dark shading, tonal drawing, smudging and blending
Mechanical pencil and lead holder diameters
0.2 mm lead——0.20.008Fine lines and small handwriting; breaks easily, use HB or harder
0.3 mm lead——0.30.012Fine lines and small handwriting; breaks easily, use HB or harder
0.4 mm lead——0.40.016Fine lines and small handwriting; breaks easily, use HB or harder
0.5 mm lead——0.50.02General writing and drawing; the most common sizes
0.7 mm lead——0.70.028General writing and drawing; the most common sizes
0.9 mm lead——0.90.035Bold lines, sketching, children's pencils; strong and break-resistant
1.3 mm lead——1.30.051Bold lines, sketching, children's pencils; strong and break-resistant
2 mm lead——20.079Lead holder (clutch pencil) for drafting and sketching; sharpened with a lead pointer
3.15 mm lead——3.150.124Lead holder (clutch pencil) for drafting and sketching; sharpened with a lead pointer
5.6 mm lead——5.60.22Lead holder (clutch pencil) for drafting and sketching; sharpened with a lead pointer

What the letters mean

H grades contain more clay: the core is harder, wears slowly, holds a sharp point and leaves a lighter, greyer line. B grades contain more graphite: softer, darker, smudge more and need sharpening more often. The number says how far from the middle: 6H is much harder than 2H, 6B much softer than 2B.

HB is the middle of the scale (hard and black) and the standard writing pencil. F (fine) sits between H and HB: it keeps a sharp point for fine writing. In the US, pencils are numbered instead: #0 ≈ 2B, #1 ≈ B, #2 ≈ HB, #2½ ≈ F, #3 ≈ H, #4 ≈ 2H. That is the common table, though some makers shift it (Faber-Castell's Grip 2001 marks HB as 2½). Scantron and other optical answer sheets ask for a #2 (HB) because the mark is dark enough to read and still erases.

Brands do not agree on darkness. Japanese pencils tend to run darker than European ones at the same grade. When matching grades across a set, test on the paper you will use, at the pressure you use.

About Pencil Grades

For writing, HB or B; for exam sheets, #2/HB. For sketching, a small set covers most work: 2H for construction lines, HB, 2B, 4B and 6B for tone. For technical drawing on paper, 2H–4H; on drafting film, special polymer leads are used. Very hard grades (6H–9H) are for faint guidelines and for marking hard materials.

The widest common ranges are Derwent Graphic (9H–9B, 20 grades) and Mitsubishi Hi-uni (10H–10B, 22 grades). Some go beyond the 9H–9B range: Staedtler Mars Lumograph has 24 grades from 10H to 12B.

Mechanical pencil leads use the same grade letters. Thin leads (0.3 mm and below) break easily in soft grades, so they are mostly sold in HB, H and 2H; 0.5 mm and 0.7 mm leads come in the widest range of grades.

Mechanical pencil lead sizes

The nominal diameter is printed on the pencil and the lead tube. Use only the size the pencil is made for: a 0.5 mm lead slips out of a 0.7 mm pencil, and a 0.7 mm lead jams a 0.5 mm mechanism. 0.5 mm is the most common size worldwide; 0.7 mm is common in the US for everyday writing; 0.3 mm suits fine handwriting and drafting; 0.9 mm and 1.3 mm are sturdy leads for sketching and children.

Questions

Is a #2 pencil HB?

Yes. The US #2 pencil corresponds to HB. #1 is about B (softer, darker), #3 about H and #4 about 2H.

Which is darker, 2B or HB?

2B. B grades get softer and darker as the number rises; HB is in the middle of the scale.

What does F mean on a pencil?

Fine. F sits between H and HB: slightly harder than HB, it keeps a sharp point for fine writing.

What is the darkest pencil grade?

On the standard scale, 9B. Some brands go further: Mitsubishi Hi-uni has 10B and Staedtler Mars Lumograph 12B.

Which mechanical pencil lead size is most common?

0.5 mm worldwide; 0.7 mm is also common in the US. 0.3 mm is for fine lines, 0.9 mm for bold, break-resistant lines.

Sources

  1. Derwent: Graphic pencils, 9H–9B grade range
  2. Mitsubishi Pencil: uni / Hi-uni grade range (10H–10B)
  3. Staedtler: Pencil degrees of hardness explained
  4. Wikipedia: Pencil: grading and classification

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.