Drum and IBC Tote Dimensions: 55 gal, 200 L, 30 gal, 5 gal Pails, 275/330 gal and 1000 L IBCs
Outside dimensions and capacity of the common bulk-liquid containers. A 55 gal steel drum is about 23.5 in across and 34.5 in high (597 × 876 mm) and holds 208 L; four fit on a 48 × 40 in pallet. A 1000 L IBC is 1200 × 1000 × about 1150 mm; the US 275 gal tote is 48 × 40 × 46 in.
Size chartTap a size for its drawing and full specs
| Container | Nominal capacityLgalL · gal | DOutside diametermminmm · in | LLength (base)mminmm · in | WWidth (base)mminmm · in | HHeight (overall)mminmm · in | Empty weight (typical)kglbkg · lb |
|---|---|---|---|---|---|---|
| Drums | ||||||
| 55 gal steel drum | 20855 | 59723.5 | — | — | 87634.5 | 17–2337–51 |
| 200 L steel drum | 20053 | 58523.03 | — | — | 88034.65 | 17–2337–51 |
| 55 gal plastic drum | 20855 | 572–59222.5–23.3 | — | — | 883–88434.75–34.8 | 8.6–1019–22 |
| 30 gal steel drum | 11430 | 464–50018.25–19.7 | — | — | 711–74928–29.5 | 11–1424–31 |
| Pails | ||||||
| 5 gal pail (bucket) | 195 | 300–31511.8–12.4 | — | — | 368–37614.5–14.8 | 0.8–12–2 |
| IBC totes | ||||||
| 275 gal IBC tote | 1041275 | — | 121948 | 101640 | 116846 | 59–64130–141 |
| 330 gal IBC tote | 1249330 | — | 121948 | 101640 | 134653 | 66–67146–148 |
| 1000 L IBC | 1000264 | — | 120047 | 100039 | 1150–120045.28–47.24 | 30–7066–154 |
No exact match. The nearest sizes:
Capacity, tight head vs open head, and UN codes
Nominal capacity is what the container is sold as; the brimful (overflow) capacity is larger. A 55 gal drum holds about 57 gal (216 L) to the brim and a 1000 L IBC about 1050 L, so fill to the nominal volume and leave headspace for expansion, typically 5 % or more for liquids that warm up.
Tight head (closed head) drums have a fixed lid with two bungs, usually 2 in and ¾ in NPS, for liquids. Open head drums have a removable lid held by a bolt ring or lever ring, for solids, pastes and viscous products. The UN code says which: 1A1 steel tight head, 1A2 steel open head, 1H1 and 1H2 the same in plastic.
The UN mark on a dangerous-goods container reads like UN 1A1/Y1.4/150/25/USA/…: type, packing group (X, Y, Z), relative density or gross mass it was tested for, test pressure, year and country. A container may only carry goods within that rating. Composite IBCs are coded 31HA1: 31 = liquids, H = plastic inner bottle, A = steel outer cage.
About Drums & IBC Totes
The 55 gal drum (200 L outside North America) is the standard unit for oils, chemicals and food ingredients. Its 23.5 in diameter was set so four drums fit on a 48 × 40 in pallet or a 48 × 48 in drum pallet; EUR 1200 × 800 pallets take only two or three, so European drums usually ship on 1200 × 1000 pallets (four per pallet).
An IBC (intermediate bulk container, 'tote') replaces about five drums on the footprint of one pallet. The cage and pallet base are built for forklift handling and stacking: most composite IBCs stack two high when full (check the stacking load on the plate). The US sizes, 275 and 330 gal, share a 48 × 40 in base and differ only in height; the European 1000 L IBC stands on a 1200 × 1000 mm base.
Pail and drum sizes are not fully standardized outside the drum's 23.5 in diameter: plastic drums and pails vary by a few millimeters to an inch between makers, so the chart gives ranges. For fittings such as drum pumps, faucets and bung wrenches, the bung threads (2 in NPS and ¾ in NPS on US drums; G2 and G¾ or 'Tri-Sure' on European drums) matter more than the drum's outside size.
How many fit in a truck or container
Four drums per pallet, single-stacked: 80 drums on 20 pallets in a 20 ft container if stacked two high, and about 26 × 4 = 104 per tier in a 53 ft trailer, but a full trailer of liquid drums is usually weight-limited (four full 55 gal drums of water weigh about 1,900 lb). IBCs: about 20 in a 20 ft container (10 on the floor, stacked two high) and 18–20 per tier in a 53 ft van; a trailer of full 275 gal IBCs reaches the weight limit at about 18.
Drum and IBC sizes at a glance
Capacity converted: 1 US gallon = 3.785 L.
| Container | US gal | Liters | Full weight with water (approx.) |
|---|---|---|---|
| 5 gal pail | 5 | 18.9 | 43 lb / 20 kg |
| 30 gal drum | 30 | 114 | 275 lb / 125 kg |
| 55 gal drum | 55 | 208 | 500 lb / 227 kg |
| 200 L drum | 52.8 | 200 | 485 lb / 220 kg |
| 275 gal IBC | 275 | 1041 | 2,430 lb / 1,100 kg |
| 330 gal IBC | 330 | 1249 | 2,900 lb / 1,315 kg |
| 1000 L IBC | 264 | 1000 | 2,330 lb / 1,060 kg |
Questions
What are the dimensions of a 55 gallon drum?
A steel 55 gal drum is about 23.5 in (597 mm) in diameter and 34.5 in (876 mm) high. Plastic 55 gal drums are about 22.5–23.3 in across and 34.75–34.8 in high.
How many liters is a 55 gallon drum?
208 liters nominal (55 × 3.785 L). Filled to the brim it holds about 57 gal, 216 L.
What are the dimensions of an IBC tote?
275 gal: 48 × 40 × 46 in. 330 gal: 48 × 40 × 53 in. European 1000 L IBC: 1200 × 1000 × 1150–1200 mm.
How much does an empty 55 gallon drum weigh?
About 38–50 lb (17–23 kg) for steel, depending on gauge, and about 19–22 lb (8.6–10 kg) for plastic.
How many 55 gallon drums fit on a pallet?
Four, on a 48 × 40 in or 48 × 48 in pallet, and also four on a 1200 × 1000 mm pallet.
What are the dimensions of a 5 gallon bucket?
About 11.8–12.4 in across at the top and 14.5–14.8 in high, depending on the maker; it holds 18.9 L.
Sources
- UN Recommendations on the Transport of Dangerous Goods, Model Regulations: packaging codes 1A1, 1A2, 1H1, 1H2, 31HA1 (ch. 6.1, 6.5)
- Greif: steel and plastic drum product specifications
- Mauser Packaging Solutions: drum and IBC specifications
- Wikipedia: Drum (container) and Intermediate bulk container (dimensions)
- Wikipedia (de): Intermediate Bulk Container (Leermasse ca. 30 bis 70 kg)
- Repackify: IBC tote dimensions and sizes (275 / 330 gal, empty weight)
- Schütz: ECOBULK MX 1000 L IBC data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.