ULD Air Cargo Container and Pallet Dimensions: LD3, LD7, PMC
Dimensions of air cargo unit load devices (ULDs). The one you see most is the LD3 (IATA code AKE): a 61.5 × 60.4 in (156 × 153 cm) base, 64 in (163 cm) high, 79 in (201 cm) wide at the top, about 4.3–4.5 m³ and 1588 kg (3500 lb) max gross. Pallets are named by base: PMC 96 × 125 in, PAG 88 × 125 in.
Size chartTap a size for its drawing and full specs
| ULD | IATA code | WBase widthmmin | DBase depthmmin | HHeightmmin | Internal volume (typical)m³ft³ | Max. gross weight (typical)kglb |
|---|---|---|---|---|---|---|
| Containers | ||||||
| LD3 | AKE | 156261.5 | 153460.4 | 162664 | 4.3–4.5152–159 | 1,5883,500 |
| LD1 | AKC | 156261.5 | 153460.4 | 162664 | 4.8–5.0169–175 | 1,5883,500 |
| LD2 | DPE | 119447 | 153460.4 | 162664 | 3.4120 | 1,2252,700 |
| LD3-45 | AKH | 156261.5 | 153460.4 | 114345 | 3.4–3.7120–131 | 1,5883,500 |
| LD6 | ALF | 3175125 | 153460.4 | 162664 | 8.8–8.9310–316 | 3,1757,000 |
| LD8 | DQF | 243896 | 153460.4 | 162664 | 6.9–6.9242–245 | 2,4495,400 |
| LD11 | ALP | 3175125 | 153460.4 | 162664 | 7.2253 | 3,1757,000 |
| LD9 | AAP | 3175125 | 223588 | 162664 | 10.8381 | — |
| Pallets | ||||||
| PAG pallet (LD7) | PAG / P1P | 3175125 | 223588 | 162664 | — | — |
| PMC pallet | PMC / P6P | 3175125 | 243896 | 162664 | — | 6,80415,000 |
| PLA pallet | PLA | 3175125 | 153460.4 | 162664 | — | 3,1757,000 |
No exact match. The nearest sizes:
How to read ULD codes
Every ULD carries a three-letter IATA type code, a serial number and the owner's airline code, for example AKE 12345 LH. The first letter is the type: A = certified container, D = non-certified container, P = certified pallet, R = thermal (temperature-controlled) container. The second letter is the base size: K = 60.4 × 61.5 in, L = 60.4 × 125 in, A = 88 × 125 in, M = 96 × 125 in, Q = 60.4 × 96 in, P = 47 × 60.4 in. The third letter gives the contour and fitting details, which differ between variants on the same base.
The LD numbers (LD1, LD3, LD6 …) are older aircraft-maker names for lower-deck containers. They describe the shape: an LD3 is any AKE, AKN or AVE-type container, meaning the same base and contour from different makers or with different doors. LD7 is used loosely for 88 × 125 in pallets and containers on the lower deck.
The base is fixed by the aircraft's cargo floor locks; the contour is cut so the unit follows the curve of the fuselage. Half-width units (LD1, LD2, LD3) load two side by side; full-width units (LD6, LD11) take the whole width of a wide-body lower hold.
About ULD Air Cargo Containers
Lower-deck containers stand 64 in (163 cm) tall to fit under the passenger cabin floor of wide-body aircraft. The LD3 is the workhorse: it fits every Boeing 747, 777 and 787 and every Airbus wide-body (A330, A340, A350, A380), and also carries passenger baggage. Narrow-body Airbus A320-family aircraft use the lower LD3-45 (AKH), 45 in high.
Pallets carry what does not fit a container. On freighters' main decks a PMC (96 × 125 in) can be built up to roughly 96–118 in high, depending on the aircraft and position; on the lower deck the same pallet is limited to the 64 in contour. Pallets are loaded by the forwarder, netted and contoured to a template, then weighed.
Volumes and weight limits in the chart are typical: makers' designs differ by a few percent in internal volume, and the allowable gross weight depends on the aircraft type, the deck position and the airline's own rules. Always check the carrier's ULD specification before you build a unit.
Which ULD for which aircraft
LD3s, LD6s and LD11s fit the lower decks of the 747, 777, 787, MD-11 and all Airbus wide-bodies. The 767 has a narrower lower hold and uses LD2 (half-width) and LD8 (full-width, equal to two LD2s); an LD3 does not fit a 767. LD1 was designed for the 747; airlines mostly use LD3s in its place because they share the same base. An A350-900 takes 36 LD3s in its lower holds, a 777-300ER 44.
Questions
What are the dimensions of an LD3 container?
Base 61.5 × 60.4 in (156 × 153 cm), height 64 in (163 cm), width at the top 79 in (201 cm). Internal volume is about 4.3–4.5 m³ (152–159 ft³) and max gross weight 1588 kg (3500 lb).
What is the difference between AKE and LD3?
None in size: AKE is the IATA type code, LD3 the traditional name. AKN and AVE are LD3-shaped containers with a different base or door construction.
What size is a PMC pallet?
96 × 125 in (244 × 318 cm). On a freighter main deck it can carry about 6800 kg (15 000 lb); on a wide-body lower deck the limit is about 4626 kg and the height 64 in.
Does an LD3 fit a Boeing 767?
No. The 767 lower hold is narrower; it uses LD2 (half-width) and LD8 (full-width) containers. LD3s fit the 747, 777, 787 and Airbus wide-bodies.
What does LD mean in LD3?
Lower deck. LD numbers name containers made for the lower cargo holds of wide-body aircraft, under the passenger cabin.
Sources
- IATA: ULD Regulations (ULDR), standard base sizes and contours
- Lufthansa Cargo: Pallets, containers and fleet brochure
- Swiss WorldCargo: ULD pallets
- Boeing: Cargo pallets and containers reference
- Rohlig: Air freight container and pallet specifications
- Shapiro: Air container specifications
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.