Pallet Size Chart: EUR, GMA 48 × 40 and ISO Pallets

Pallet footprints and how many fit on a container floor. The two that matter most: the EUR pallet, 1200 × 800 × 144 mm (EPAL 1, about 25 kg, 1500 kg safe working load) and the North American GMA pallet, 48 × 40 in (1219 × 1016 mm). One tier, a 20 ft container takes 11 EUR or 9 GMA pallets; a 40 ft takes 25 EUR or 20 GMA.

17 sizesChecked 2026-11-156 sources
One tier, floor 5898 × 2352 mm (20 ft) and 12032 × 2352 mm (40 ft), best layouts with pallets turned where it helps.Drawn to scale

Size chartTap a size for its drawing and full specs

17 of 17
PalletLLengthmminmm · inWWidthmminmm · inHHeightmminmm · inSafe working loadkglbkg · lbPer 20 ft container (1 tier)Per 40 ft container (1 tier)
Europe (EUR / EPAL)
EUR / EPAL 1120047.280031.51445.67150033071125
EUR 2 / EPAL 2120047.2100039.41626.3812502756922
EUR 3 / EPAL 3100039.4120047.21445.6715003307922
EUR 6 / EPAL 6 (half pallet)80031.560023.61445.6750011022555
Quarter pallet60023.640015.7——52110
North America (inch sizes)
48 × 40 in (GMA)121948101640——920
42 × 42 in106742106742——1022
48 × 48 in121948121948——49
48 × 42 in121948106742——920
48 × 45 in121948114345——818
44 × 44 in111844111844——1020
40 × 40 in101640101640——1022
48 × 36 in12194891436——1022
36 × 36 in9143691436——1226
Asia-Pacific and ISO square sizes
Australian standard (1165 × 1165)116545.9116545.9——1020
1140 × 1140 mm (ISO)114044.9114044.9——1020
1100 × 1100 mm (T11)110043.3110043.3——1020

How pallet sizes are given

A pallet size is length × width. For North American stringer pallets the first number is the stringer length, so a 48 × 40 has 48 in stringers and is entered by forklifts from the 40 in ends. For EUR pallets the order also matters: EPAL 2 (1200 × 1000) and EPAL 3 (1000 × 1200) share a footprint but are different pallets, with a different board layout, height and load rating.

EUR/EPAL pallets are block pallets: nine blocks between the top deck and three bottom boards, open for forks and pallet jacks from all four sides. A genuine EPAL pallet carries the EPAL logo on the corner blocks, a production stamp and a staple with the control mark. GMA pallets in North America are stringer pallets: three 48 in stringers notched for forklift entry on the 40 in sides, so a pallet jack can enter only from the two 40 in ends.

Safe working load for EPAL pallets (1500 kg for EPAL 1) is for an evenly spread load with the pallet on a firm, level floor. Racking without support under the deck, point loads or damaged boards reduce it. North American pallets have no common rating: capacity depends on wood species, board thickness and nailing, so take it from the supplier.

About Pallet Sizes

Most of the world's pallets fall into six footprints that ISO 6780 recognises for intercontinental transport: 1200 × 800 (EUR), 1200 × 1000, 48 × 40 in (1219 × 1016), 1140 × 1140, 42 × 42 in (1067 × 1067) and 1100 × 1100 mm. Australia's national pallet is 1165 × 1165 mm, designed for its old rail wagons, and some summaries list it in place of 1140 × 1140.

The EUR pallet was made to fit European trucks: a 2.45 m wide semi-trailer takes three EUR pallets across (3 × 800 = 2400 mm) or two 1200 × 1000 pallets, and a 13.6 m trailer holds 33 EUR or 26 industrial pallets on the floor. ISO shipping containers are narrower inside (2352 mm), which is why neither EUR nor US pallets fill them well.

Container counts in the chart are floor positions for one tier, every pallet flat, no overhang, computed for a typical 20 ft (5898 × 2352 mm) and 40 ft (12032 × 2352 mm) floor with both orientations allowed. In practice you need 10–20 mm of play per row and the door opening (2340 mm) to load, so tight layouts such as 25 EUR pallets in a 40 ft need careful loading; 24 is the common planning figure. Pallet-wide containers (2440 mm inside) take 30 EUR pallets in 40 ft.

Why 10 US pallets do not fit in a 20 ft container

You will often read that a 20 ft container holds 10 GMA pallets. It cannot, on the floor: two 48 in sides side by side need 2438 mm and the container is 2352 mm wide, so pallets must go with the 40 in side across (2 × 1016 = 2032 mm), and five rows of 48 in need 6096 mm, more than the 5898 mm floor. The best layout is 9. The same geometry gives 20 GMA pallets in a 40 ft container.

Heat treatment for export (ISPM 15)

Wooden pallets crossing borders must be heat-treated or fumigated and stamped under ISPM 15 (the stamp shows the IPPC logo, country code, producer number and HT or MB). EPAL pallets are produced heat-treated as standard. Plastic, presswood and metal pallets are exempt.

Questions

What are the dimensions of a Euro pallet?

1200 × 800 × 144 mm (47.2 × 31.5 × 5.7 in). An EPAL 1 Euro pallet weighs about 25 kg and has a safe working load of 1500 kg.

What is the standard pallet size in the US?

48 × 40 in (1219 × 1016 mm), the GMA pallet. Other common sizes are 42 × 42, 48 × 48 and 48 × 42 in.

How many pallets fit in a 20 ft container?

One tier: 11 EUR pallets (1200 × 800) or 9 US pallets (48 × 40 in) or 9 pallets of 1200 × 1000. Stacked two high, double that if the goods and the weight limit allow.

How many pallets fit in a 40 ft container?

One tier: 25 EUR pallets in the best layout (24 is the usual planning figure) or 20 US 48 × 40 pallets. A 40 ft high cube has the same floor, so the same number of floor positions.

How many Euro pallets fit on a truck?

A standard 13.6 m European semi-trailer takes 33 EUR pallets (3 across, 11 rows) or 26 pallets of 1200 × 1000 mm on the floor.

What is the difference between EPAL 2 and EPAL 3?

Both are 1200 × 1000 mm. EPAL 2 is 162 mm high with a 1250 kg safe working load; EPAL 3 is 144 mm high with 1500 kg and a different board layout.

Sources

  1. EPAL: EPAL 1 (Euro pallet) product data sheet
  2. EPAL: EPAL 2 pallet product data sheet
  3. EPAL: EPAL 6 product data sheet (800 × 600 mm, 500 kg)
  4. ISO 6780:2003, Flat pallets for intercontinental materials handling, principal dimensions and tolerances
  5. NWPCA: Pallet sizes and the GMA 48 × 40 pallet
  6. Logistics Cluster: Pallet specifications

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.