Shipping Container Dimensions: 20 ft, 40 ft, High Cube, Reefer

Outside, inside and door dimensions of ISO shipping containers with weights, volume and pallet capacity. The reference box: a 20 ft dry container is 6058 × 2438 × 2591 mm outside and about 5898 × 2352 × 2393 mm inside (33 m³); a 40 ft is 12192 mm long (67.7 m³), and a high cube adds 305 mm (1 ft) of height.

11 sizesChecked 2026-11-156 sources
External length in mm. Two 20 ft boxes plus a 76 mm gap equal one 40 ft; high cubes are 305 mm taller.Drawn to scale

Size chartTap a size for its drawing and full specs

11 of 11
ContainerlInternal length (typical)mminwInternal width (typical)mminhInternal height (typical)mminCapacity (typical)m³ft³Max. payload (typical)kglbEUR pallets, 1 tier
Dry (general purpose) and high cube
10 ft dry2,802110.31235292.60239394.2115.8558—5
20 ft dry (20' DV)5,898232.20235292.60239394.2133.2117228,18062,12611
40 ft dry (40' DV)12,032473.70235292.60239394.2167.7239126,73058,93025
40 ft high cube12,032473.70235292.602698106.2276.4269826,58058,59925
45 ft high cube13,556533.70235292.602698106.22863037—27
Refrigerated (reefer)
20 ft reefer5,444214.33229490.31227689.6128.399927,40060,40710
40 ft high cube reefer11,583456.02229490.312500–255498.43–100.55672366—23
Open top
20 ft open top5,898232.20235292.60234892.4432.5114828,13062,01611
40 ft open top12,032473.70235292.60234892.4466.4234526,63058,70925
Flat rack
20 ft flat rack5,612–5,940220.94–233.862225–243887.60–95.982213–225587.13–88.78———
40 ft flat rack11,660–12,080459.06–475.592230–242087.80–95.281955–224576.97–88.39———

What the container numbers mean

External dimensions are fixed by ISO 668 and identical for every box of a type: 20 ft containers are 6058 mm (19 ft 10½ in) long, not 20 ft, so that two of them with a 76 mm gap occupy the same slot as one 40 ft (12192 mm). All are 2438 mm (8 ft) wide; standard boxes are 2591 mm (8 ft 6 in) high and high cubes 2896 mm (9 ft 6 in).

Internal dimensions, door openings and tare vary slightly between builders and series, so the chart gives typical values. Plan with 20–30 mm less than the listed inside size when a load is tight, and remember the door opening is smaller than the inside: about 2340 mm wide and 2280 mm high on a standard box (2585 mm on a high cube).

Weights: tare is the empty container; max gross is the rated total; payload is the difference. The rating on the CSC safety-approval plate on the door is what counts. ISO 668 now allows up to 36 000 kg, and boxes in service are plated anywhere from 30 480 to 36 000 kg. Road weight limits are often lower than the container rating, so check the axle and gross vehicle limits on the inland leg.

ISO type codes on the door (e.g. 22G1, 45G1) give length, height and type: the first digit is the length (2 = 20 ft, 4 = 40 ft, L = 45 ft), the second the height (2 = 8 ft 6 in, 5 = 9 ft 6 in high cube), then the type (G = general, R = reefer, U = open top, P = platform/flat rack).

About Shipping Containers

Containers are measured in TEU (twenty-foot equivalent units): a 20 ft is 1 TEU, a 40 ft or 40 ft high cube is 2 TEU. Freight rates for a 40 ft are usually well below twice the 20 ft rate, so for light, bulky cargo the 40 ft high cube (76 m³) is the cheapest space per cubic metre. Heavy cargo (stone, metal, paper) fills a 20 ft by weight long before it fills it by volume.

Reefers lose about 450 mm of inside length to the refrigeration unit and some width and height to insulation: a 20 ft reefer holds about 28 m³ instead of 33 m³. Load reefer cargo only up to the red line near the ceiling and leave the T-floor gratings clear so the cold air can circulate.

Open tops take cargo that must be crane-loaded from above or is taller than the door; the roof bows and tarpaulin come off, and the door header swings out of the way. Flat racks have only a floor and end walls (often collapsible) for oversized machinery, boats and steel; their inside dimensions depend strongly on the builder, so the chart gives ranges and no volume.

Pallets per container

Neither EUR nor US pallets match the 2352 mm inside width. One tier on the floor, a 20 ft takes 11 EUR pallets or 9 US 48 × 40 pallets, a 40 ft (or 40 ft high cube) 25 EUR (24 is the usual planning figure) or 20 US. Reefers are narrower inside (2294 mm) and shorter: 10 EUR pallets in a 20 ft reefer, 23 in a 40 ft high cube reefer. The counts in the chart are computed for each container's typical floor; see the pallets chart for the layouts.

Pallet-wide containers

Some European operators use 'pallet-wide' containers with about 2440 mm inside width so three EUR pallets fit across: 30 in a 40 ft and 33 in a 45 ft. Their outside width is still 2500 mm or less, so they are not standard ISO boxes for every ship slot.

Questions

What are the inside dimensions of a 20 ft container?

About 5898 mm long, 2352 mm wide and 2393 mm high (19 ft 4 in × 7 ft 8½ in × 7 ft 10 in), about 33 m³. The door opening is about 2340 × 2280 mm.

What are the inside dimensions of a 40 ft high cube?

About 12032 × 2352 × 2698 mm (39 ft 5½ in × 7 ft 8½ in × 8 ft 10 in), about 76 m³. The door opening is about 2340 × 2585 mm.

How much weight can a 20 ft container carry?

A typical 20 ft dry box has a tare of about 2300 kg and a rating of 30 480 kg gross, so about 28 t of cargo. Newer boxes may be plated higher. Road weight limits often cap the load lower.

Why is a 20 ft container not 20 ft long?

It is 6058 mm (19 ft 10½ in) so that two 20 ft containers plus a 76 mm gap take exactly the space of one 40 ft (12192 mm, 40 ft) in ship cells and on chassis.

How many pallets fit in a 40 ft container?

One tier: 25 EUR pallets (24 in normal loading) or 20 US 48 × 40 pallets. A high cube has the same floor, so the same count, but more room for stacking.

What is the difference between a 40 ft and a 40 ft high cube?

Only the height: 2896 mm (9 ft 6 in) outside instead of 2591 mm (8 ft 6 in). Inside height goes from about 2393 to 2698 mm and volume from 67.7 to 76.4 m³.

Sources

  1. ISO 668:2020, Series 1 freight containers, classification, dimensions and ratings
  2. ISO 1496-1: Series 1 freight containers, specification and testing, general cargo containers
  3. Hapag-Lloyd: Container specification (container fleet data)
  4. DSV: Shipping container dimensions (dry, reefer, open top, flat rack)
  5. Rohlig: Container specifications (reefer, open top)
  6. Triton International / Searates: Flat rack specifications

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.