Freight Class Chart: NMFC Classes 50–500 and the 2025 Density Scale

US less-than-truckload (LTL) freight is rated by NMFC class, from 50 (dense, cheap to ship) to 500 (light and bulky). Since July 19, 2025 most freight is classed by density on a 13-step scale: for example 15 to under 22.5 lb/ft³ is class 70, 50 lb/ft³ or more is class 50, under 1 lb/ft³ is class 400.

18 sizesChecked 2026-11-155 sources
40030025017512510092.585706560555012468101522.53550Density, lb/ft³ (logarithmic)Class
Each step is the class for that density band; higher bars are higher classes. Density axis is logarithmic.Proportions shown, not to scale

Size chartSort by any column, or filter to find a row

18 of 18
ClassDensity, NMFC 13-step scale (lb/ft³)Same band in kg/m³Old guideline chart (lb/ft³, not NMFC)
On the density scale (13 steps)
Class 5050 or more801 or more50 or more
Class 5535 to under 50561 to under 80135 to under 50
Class 6030 to under 35481 to under 56130 to under 35
Class 6522.5 to under 30360 to under 48122.5 to under 30
Class 7015 to under 22.5240 to under 36015 to under 22.5
Class 8512 to under 15192 to under 24012 to under 13.5
Class 92.510 to under 12160 to under 19210.5 to under 12
Class 1008 to under 10128 to under 1609 to under 10.5
Class 1256 to under 896 to under 1287 to under 8
Class 1754 to under 664 to under 965 to under 6
Class 2502 to under 432 to under 643 to under 4
Class 3001 to under 216 to under 322 to under 3
Class 400under 1under 161 to under 2
Item-specific only (not on the density scale)
Class 77.5——13.5 to under 15
Class 110——8 to under 9
Class 150——6 to under 7
Class 200——4 to under 5
Class 500——under 1

How to find the class of a shipment

1. Measure the handling unit: the pallet or crate as shipped, including the pallet and any overhang, to the furthest points. 2. Weigh it, pallet included. 3. Density = weight ÷ volume: in inches, volume (ft³) = L × W × H ÷ 1728. A 48 × 40 × 48 in pallet is 53.3 ft³; at 500 lb it is 9.4 lb/ft³, which is class 100 (8 to under 10).

4. Check the NMFC item. Density applies when the commodity's NMFC item refers to the density scale, which after Docket 2025-1 is the case for most freight. Some items still carry a fixed class or their own density breaks, and items with handling, stowability or liability problems (fragile, hazardous, very long) can rate higher. The NMFC item number goes on the bill of lading.

Carriers inspect and re-measure with dimensioners. If the declared class or dimensions are wrong, the shipment is reclassed and re-billed, often with an inspection fee. Many shippers also have FAK (freight all kinds) agreements that bill a range of classes at one class.

About Freight Classes

Freight class sets the LTL rate per hundredweight (cwt): the higher the class, the higher the rate for the same weight. Class reflects four characteristics (density, handling, stowability and liability), but density dominates, because it decides how much weight fits in a trailer.

Docket 2025-1 was the largest NMFC change in decades. It moved thousands of commodity items to density ratings and added two dense steps to the standard scale: 35 to under 50 lb/ft³ (class 55) and 50 lb/ft³ or more (class 50). Classes 77.5, 110, 150, 200 and 500 still exist but are not steps on the density scale; they apply only where a specific NMFC item names them.

Many websites still show an older 18-step 'freight class chart' with a density band for every class (for example 13.5–15 lb/ft³ = class 77.5). That table was a rule of thumb, never the NMFC scale; it is kept here for comparison. Use the 13-step scale and the actual NMFC item for quoting.

Old 11-step scale vs the 13-step scale (July 2025)

The new scale keeps the 11 old steps and splits the densest one.

Density (lb/ft³)Class before July 19, 2025 (11 steps)Class from July 19, 2025 (13 steps)
Under 1400400
1 to under 2300300
2 to under 4250250
4 to under 6175175
6 to under 8125125
8 to under 10100100
10 to under 1292.592.5
12 to under 158585
15 to under 22.57070
22.5 to under 306565
30 to under 356060
35 to under 506055
50 or more6050

Questions

How do I calculate freight class?

Measure the shipment in inches, multiply L × W × H and divide by 1728 to get cubic feet, then divide the weight in pounds by that volume. Look up the density on the scale: for example 9.4 lb/ft³ is class 100 (8 to under 10).

What changed in the NMFC on July 19, 2025?

Docket 2025-1 moved most commodities to density-based classes and extended the scale from 11 to 13 steps, adding class 55 (35 to under 50 lb/ft³) and class 50 (50 lb/ft³ or more). Before, everything at 30 lb/ft³ or more was class 60.

What is freight class 70?

On the density scale, 15 to under 22.5 lb/ft³ (240 to under 360 kg/m³), typical for dense palletized goods such as boxed food, auto parts or machinery parts.

What is the most common freight class?

Classes 70 to 125 cover most palletized LTL freight. A 48 × 40 × 48 in pallet weighing 500 lb is 9.4 lb/ft³, class 100.

Is there still a class 77.5 or 150?

Yes, but only for NMFC items that specify them. They are not steps on the density scale, so a density calculation never results in 77.5, 110, 150, 200 or 500.

What is the lowest freight class?

Class 50, for freight of 50 lb/ft³ (800 kg/m³) or more on the density scale, for example bricks, steel or bagged cement.

Sources

  1. NMFTA: Docket 2025-1, Subject 1 analysis: 13-sub-provision density scale (effective July 19, 2025)
  2. NMFTA: Docket 2025-1, Subject 1 disposition
  3. FedEx Freight: NMFC changes (density scale summary)
  4. NMFTA: Decoding density: the freight factor you can't afford to overlook
  5. ArcBest: Freight class and NMFC code basics

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.