EAN-8 Barcode: Size, Structure and Check Digit
Barcodes · GS1 retail point-of-sale (EAN/UPC)
EAN-8: Linear (1D). Data: 8 digits (7 + check digit). Error checking: Modulo 10, weights 3-1. Standard: ISO/IEC 15420; GS1 General Specifications. Typical use: Very small retail packs where an EAN-13 does not fit.
- XX-dimension at 100 %
- 0.330 mm0.0130 in0.0130 in0.330 mm
- Width at 100 %
- 26.73 mm1.052 in1.052 in26.73 mm
- Bar height (nominal)
- 18.23 mm0.718 in0.718 in18.23 mm
- Type
- Linear (1D)
Drawing
EAN-8 specifications
| Type | Linear (1D) |
|---|---|
| Character set | Digits 0–9 |
| Data length | 8 digits (7 + check digit) |
| Check digit / error correction | Modulo 10, weights 3-1 |
| Standard | ISO/IEC 15420; GS1 General Specifications |
| XX-dimension at 100 % | 0.330 mm0.0130 in |
| Width at 100 % | 26.73 mm1.052 in |
| Height at 100 % | 21.31 mm0.839 in |
| Bar height (nominal) | 18.23 mm0.718 in |
| Allowed size range | X 0.264–0.660 mm (80–200 %) |
| Quiet zone | 7 X each side |
| Typical use | Very small retail packs where an EAN-13 does not fit |
EAN-8 numbers are issued individually by GS1 offices and only for packs too small for an EAN-13 even at the minimum size. At 100 % the symbol is 26.73 × 21.31 mm with 18.23 mm bars.
Also known as
GTIN-8
All barcode types
Sources
- GS1 General Specifications (Release 24.0): §5 symbol specifications, symbol specification tables
- GS1: How to calculate a check digit manually
- GS1 Sweden: Barcode size guide (X-dimension and height tables)
- GS1 UK: How big should an ITF-14 barcode be?
- ISO/IEC 15420 (EAN/UPC), 15417 (Code 128), 16388 (Code 39), 16390 (ITF), 24724 (GS1 DataBar)
- ISO/IEC 18004 (QR Code), 16022 (Data Matrix), 15438 (PDF417), 24778 (Aztec Code)
- JsBarcode (MIT): Code 128 / Code 39 / Codabar pattern tables used to cross-check the drawings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.