ITF-14 Barcode: Size, Structure and Check Digit
Barcodes · GS1 logistics and variable data
ITF-14: Linear (1D). Data: 14 digits (13 + check digit). Error checking: Modulo 10, weights 3-1. Standard: ISO/IEC 16390 (ITF); GS1 General Specifications. Typical use: Outer cases and cartons printed directly on corrugated board.
- XX-dimension at 100 %
- 1.016 mm0.0400 in0.0400 in1.016 mm
- Width at 100 %
- 142.75 mm5.620 in5.620 in142.75 mm
- Bar height (nominal)
- 32.00 mm1.260 in1.260 in32.00 mm
- Type
- Linear (1D)
Drawing
ITF-14 specifications
| Type | Linear (1D) |
|---|---|
| Character set | Digits 0–9 |
| Data length | 14 digits (13 + check digit) |
| Check digit / error correction | Modulo 10, weights 3-1 |
| Standard | ISO/IEC 16390 (ITF); GS1 General Specifications |
| XX-dimension at 100 % | 1.016 mm0.0400 in |
| Width at 100 % | 142.75 mm5.620 in |
| Bar height (nominal) | 32.00 mm1.260 in |
| Allowed size range | X 0.495–1.016 mm (GS1 general distribution) |
| Quiet zone | 10 X each side, plus bearer bars |
| Typical use | Outer cases and cartons printed directly on corrugated board |
ITF-14 is printed directly on corrugated cartons, so it is large and coarse: X = 1.016 mm at 100 %, 142.75 mm wide including the 10 X quiet zones, 32 mm bar height, framed by a bearer bar. The 14-digit GTIN usually starts with an indicator digit 1–8 that identifies the packaging level, followed by the 12 digits of the consumer unit's GTIN-13 without its check digit and a new check digit.
Also known as
All barcode types
Sources
- GS1 General Specifications (Release 24.0): §5 symbol specifications, symbol specification tables
- GS1: How to calculate a check digit manually
- GS1 Sweden: Barcode size guide (X-dimension and height tables)
- GS1 UK: How big should an ITF-14 barcode be?
- ISO/IEC 15420 (EAN/UPC), 15417 (Code 128), 16388 (Code 39), 16390 (ITF), 24724 (GS1 DataBar)
- ISO/IEC 18004 (QR Code), 16022 (Data Matrix), 15438 (PDF417), 24778 (Aztec Code)
- JsBarcode (MIT): Code 128 / Code 39 / Codabar pattern tables used to cross-check the drawings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.