C4×6.25 Channel Dimensions & Properties

C & MC Channels (AISC) · C shapes: American Standard channels

C4×6.25 is an AISC C shapes: American Standard channels channel. It is 4 in (101.6 mm) deep with a 1.65 in (41.9 mm) flange, a 0.247 in (6.3 mm) web and an average flange thickness of 0.296 in (7.5 mm), and weighs 6.3 lb/ft (9.3 kg/m). Area 1.84 in² (1,187 mm²); centroid 0.453 in (11.5 mm) from the back of the web; Ix = 4.19 in⁴ (174.4 cm⁴), Sx = 2.1 in³ (34.4 cm³).

dDepth
101.6 mm4 in4 in101.6 mm
bfFlange width
41.9 mm1.65 in1.65 in41.9 mm
twWeb thickness
6.3 mm0.247 in0.247 in6.3 mm
tfFlange thickness (average)
7.5 mm0.296 in0.296 in7.5 mm

Drawing

41.9 mm1.65 in101.6 mm4 intf 7.5 mmtf 0.296 intw 6.3 mmtw 0.247 ine 11.5 mme 0.453 in
Drawn to scale · Dimensions in mmDimensions in inches

C4×6.25 specifications

dDepth4 in101.6 mm
bfFlange width1.65 in41.9 mm
twWeb thickness0.247 in6.3 mm
tfFlange thickness (average)0.296 in7.5 mm
kDesign value0.75 in19.0 mm
kDetailing value3/4 in19.0 mm
WWeight6.3 lb/ft9.3 kg/m
AArea1.84 in²1,187 mm²
x̄Centroid from back of web0.453 in11.5 mm
eoShear centre from web0.447 in11.4 mm
IxMoment of inertia, strong axis4.19 in⁴174.4 cm⁴
ZxPlastic modulus, strong axis2.55 in³41.8 cm³
SxSection modulus, strong axis2.1 in³34.4 cm³
rxRadius of gyration, strong axis1.51 in38.4 mm
IyMoment of inertia, weak axis0.374 in⁴15.6 cm⁴
ZyPlastic modulus, weak axis0.623 in³10.2 cm³
SySection modulus, weak axis0.312 in³5.1 cm³
ryRadius of gyration, weak axis0.45 in11.5 mm
JTorsional constant0.055 in⁴2.29 cm⁴
Metric designationC100×9.3

Also known as

C100×9.3

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.