MC12×14.3 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC12×14.3 is an AISC MC shapes: miscellaneous channels channel. It is 12 in (304.8 mm) deep with a 2.12 in (53.8 mm) flange, a 0.25 in (6.4 mm) web and an average flange thickness of 0.313 in (8.0 mm), and weighs 14.3 lb/ft (21.3 kg/m). Area 4.18 in² (2,697 mm²); centroid 0.377 in (9.6 mm) from the back of the web; Ix = 76.1 in⁴ (3,167.5 cm⁴), Sx = 12.7 in³ (208.1 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
53.8 mm2.12 in2.12 in53.8 mm
twWeb thickness
6.4 mm0.25 in0.25 in6.4 mm
tfFlange thickness (average)
8.0 mm0.313 in0.313 in8.0 mm

Drawing

53.8 mm2.12 in304.8 mm12 intf 8.0 mmtf 0.313 intw 6.4 mmtw 0.25 ine 9.6 mme 0.377 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC12×14.3 specifications

dDepth12 in304.8 mm
bfFlange width2.12 in53.8 mm
twWeb thickness0.25 in6.4 mm
tfFlange thickness (average)0.313 in8.0 mm
kDesign value0.75 in19.0 mm
kDetailing value3/4 in19.0 mm
WWeight14.3 lb/ft21.3 kg/m
AArea4.18 in²2,697 mm²
x̄Centroid from back of web0.377 in9.6 mm
eoShear centre from web0.435 in11.0 mm
IxMoment of inertia, strong axis76.1 in⁴3,167.5 cm⁴
ZxPlastic modulus, strong axis15.9 in³260.6 cm³
SxSection modulus, strong axis12.7 in³208.1 cm³
rxRadius of gyration, strong axis4.27 in108.5 mm
IyMoment of inertia, weak axis1 in⁴41.6 cm⁴
ZyPlastic modulus, weak axis1.21 in³19.8 cm³
SySection modulus, weak axis0.574 in³9.4 cm³
ryRadius of gyration, weak axis0.49 in12.4 mm
JTorsional constant0.117 in⁴4.87 cm⁴
Metric designationMC310×21.3

Also known as

MC310×21.3

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.