MC13×50 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC13×50 is an AISC MC shapes: miscellaneous channels channel. It is 13 in (330.2 mm) deep with a 4.41 in (112.0 mm) flange, a 0.787 in (20.0 mm) web and an average flange thickness of 0.61 in (15.5 mm), and weighs 50 lb/ft (74.4 kg/m). Area 14.7 in² (9,484 mm²); centroid 0.974 in (24.7 mm) from the back of the web; Ix = 314 in⁴ (13,069.7 cm⁴), Sx = 48.3 in³ (791.5 cm³).

dDepth
330.2 mm13 in13 in330.2 mm
bfFlange width
112.0 mm4.41 in4.41 in112.0 mm
twWeb thickness
20.0 mm0.787 in0.787 in20.0 mm
tfFlange thickness (average)
15.5 mm0.61 in0.61 in15.5 mm

Drawing

112.0 mm4.41 in330.2 mm13 intf 15.5 mmtf 0.61 intw 20.0 mmtw 0.787 ine 24.7 mme 0.974 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC13×50 specifications

dDepth13 in330.2 mm
bfFlange width4.41 in112.0 mm
twWeb thickness0.787 in20.0 mm
tfFlange thickness (average)0.61 in15.5 mm
kDesign value1.44 in36.6 mm
kDetailing value1 7/16 in36.5 mm
WWeight50 lb/ft74.4 kg/m
AArea14.7 in²9,484 mm²
x̄Centroid from back of web0.974 in24.7 mm
eoShear centre from web0.815 in20.7 mm
IxMoment of inertia, strong axis314 in⁴13,069.7 cm⁴
ZxPlastic modulus, strong axis60.8 in³996.3 cm³
SxSection modulus, strong axis48.3 in³791.5 cm³
rxRadius of gyration, strong axis4.62 in117.3 mm
IyMoment of inertia, weak axis16.4 in⁴682.6 cm⁴
ZyPlastic modulus, weak axis10.2 in³167.1 cm³
SySection modulus, weak axis4.77 in³78.2 cm³
ryRadius of gyration, weak axis1.06 in26.9 mm
JTorsional constant2.96 in⁴123.2 cm⁴
Metric designationMC330×74

Also known as

MC330×74

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.