MC18×51.9 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC18×51.9 is an AISC MC shapes: miscellaneous channels channel. It is 18 in (457.2 mm) deep with a 4.1 in (104.1 mm) flange, a 0.6 in (15.2 mm) web and an average flange thickness of 0.625 in (15.9 mm), and weighs 51.9 lb/ft (77.2 kg/m). Area 15.3 in² (9,871 mm²); centroid 0.858 in (21.8 mm) from the back of the web; Ix = 627 in⁴ (26,097.7 cm⁴), Sx = 69.6 in³ (1140.5 cm³).

dDepth
457.2 mm18 in18 in457.2 mm
bfFlange width
104.1 mm4.1 in4.1 in104.1 mm
twWeb thickness
15.2 mm0.6 in0.6 in15.2 mm
tfFlange thickness (average)
15.9 mm0.625 in0.625 in15.9 mm

Drawing

104.1 mm4.1 in457.2 mm18 intf 15.9 mmtf 0.625 intw 15.2 mmtw 0.6 ine 21.8 mme 0.858 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC18×51.9 specifications

dDepth18 in457.2 mm
bfFlange width4.1 in104.1 mm
twWeb thickness0.6 in15.2 mm
tfFlange thickness (average)0.625 in15.9 mm
kDesign value1.44 in36.6 mm
kDetailing value1 7/16 in36.5 mm
WWeight51.9 lb/ft77.2 kg/m
AArea15.3 in²9,871 mm²
x̄Centroid from back of web0.858 in21.8 mm
eoShear centre from web0.797 in20.2 mm
IxMoment of inertia, strong axis627 in⁴26,097.7 cm⁴
ZxPlastic modulus, strong axis87.3 in³1430.6 cm³
SxSection modulus, strong axis69.6 in³1140.5 cm³
rxRadius of gyration, strong axis6.41 in162.8 mm
IyMoment of inertia, weak axis16.3 in⁴678.5 cm⁴
ZyPlastic modulus, weak axis9.86 in³161.6 cm³
SySection modulus, weak axis5.02 in³82.3 cm³
ryRadius of gyration, weak axis1.03 in26.2 mm
JTorsional constant2.03 in⁴84.49 cm⁴
Metric designationMC460×77.2

Also known as

MC460×77.2

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.