MC6×15.1 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC6×15.1 is an AISC MC shapes: miscellaneous channels channel. It is 6 in (152.4 mm) deep with a 2.94 in (74.7 mm) flange, a 0.316 in (8.0 mm) web and an average flange thickness of 0.475 in (12.1 mm), and weighs 15.1 lb/ft (22.5 kg/m). Area 4.44 in² (2,865 mm²); centroid 0.94 in (23.9 mm) from the back of the web; Ix = 24.9 in⁴ (1,036.4 cm⁴), Sx = 8.3 in³ (136 cm³).

dDepth
152.4 mm6 in6 in152.4 mm
bfFlange width
74.7 mm2.94 in2.94 in74.7 mm
twWeb thickness
8.0 mm0.316 in0.316 in8.0 mm
tfFlange thickness (average)
12.1 mm0.475 in0.475 in12.1 mm

Drawing

74.7 mm2.94 in152.4 mm6 intf 12.1 mmtf 0.475 intw 8.0 mmtw 0.316 ine 23.9 mme 0.94 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC6×15.1 specifications

dDepth6 in152.4 mm
bfFlange width2.94 in74.7 mm
twWeb thickness0.316 in8.0 mm
tfFlange thickness (average)0.475 in12.1 mm
kDesign value1.06 in26.9 mm
kDetailing value1 1/16 in27.0 mm
WWeight15.1 lb/ft22.5 kg/m
AArea4.44 in²2,865 mm²
x̄Centroid from back of web0.94 in23.9 mm
eoShear centre from web0.982 in24.9 mm
IxMoment of inertia, strong axis24.9 in⁴1,036.4 cm⁴
ZxPlastic modulus, strong axis9.83 in³161.1 cm³
SxSection modulus, strong axis8.3 in³136 cm³
rxRadius of gyration, strong axis2.37 in60.2 mm
IyMoment of inertia, weak axis3.46 in⁴144 cm⁴
ZyPlastic modulus, weak axis3.3 in³54.1 cm³
SySection modulus, weak axis1.73 in³28.3 cm³
ryRadius of gyration, weak axis0.88 in22.4 mm
JTorsional constant0.285 in⁴11.86 cm⁴
Metric designationMC150×22.5

Also known as

MC150×22.5

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.