430×100×64 PFC Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)

430×100×64 PFC (PFC: British parallel flange channels, BS 4-1) is 430 mm (16.929 in) deep with a 100 mm (3.937 in) flange, a 11 mm (0.433 in) web and a 19 mm (0.748 in) flange. Mass 64.4 kg/m (43.275 lb/ft), area 82.1 cm² (12.726 in²); strong-axis I = 21,900 cm⁴ (526.15 in⁴), Wel = 1,020 cm³ (62.24 in³).

hDepth
430 mm16.929 in16.929 in430 mm
bFlange width
100 mm3.937 in3.937 in100 mm
twWeb thickness
11 mm0.433 in0.433 in11 mm
tfFlange thickness
19 mm0.748 in0.748 in19 mm

Drawing

100 mm3.937 in430 mm16.929 intf 19 mmtf 0.748 intw 11 mmtw 0.433 ine 2.62 cme 1.031 in
Drawn to scale · Dimensions in mmDimensions in inches

430×100×64 PFC specifications

hDepth430 mm16.929 in
bFlange width100 mm3.937 in
twWeb thickness11 mm0.433 in
tfFlange thickness19 mm0.748 in
r1Root radius15 mm0.591 in
GMass64.4 kg/m43.275 lb/ft
AArea82.1 cm²12.726 in²
eCentroid from back of web2.62 cm1.031 in
IyMoment of inertia, strong axis21,900 cm⁴526.15 in⁴
Wel,yElastic modulus, strong axis1,020 cm³62.24 in³
Wpl,yPlastic modulus, strong axis1,220 cm³74.45 in³
iyRadius of gyration, strong axis16.3 cm6.417 in
IzMoment of inertia, weak axis722 cm⁴17.35 in⁴
Wel,zElastic modulus, weak axis97.9 cm³5.97 in³
izRadius of gyration, weak axis2.97 cm1.169 in

Also known as

PFC430x100x64

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.