30Ш1 I-Beam Dimensions & Weight

GOST I-Beams (Russia) · Ш: wide-flange beams, широкополочные

30Ш1 (Ш: wide-flange beams, широкополочные) is 294 mm (11.575 in) deep and 200 mm (7.874 in) wide, with a 8 mm (0.315 in) web, 12 mm (0.472 in) flanges and a 18 mm (0.709 in) fillet radius. Area 72.38 cm² (11.219 in²), weight 56.8 kg/m (38.17 lb/ft), ГОСТ Р 57837-2017.

hDepth
294 mm11.575 in11.575 in294 mm
bFlange width
200 mm7.874 in7.874 in200 mm
sWeb thickness
8 mm0.315 in0.315 in8 mm
tFlange thickness
12 mm0.472 in0.472 in12 mm

Drawing

200 mm7.874 in294 mm11.575 int 12 mmt 0.472 ins 8 mms 0.315 inr 18 mmr 0.709 in
Drawn to scale · Dimensions in mmDimensions in inches

30Ш1 specifications

hDepth294 mm11.575 in
bFlange width200 mm7.874 in
sWeb thickness8 mm0.315 in
tFlange thickness12 mm0.472 in
rFillet radius18 mm0.709 in
AArea72.38 cm²11.219 in²
mWeight56.8 kg/m38.17 lb/ft

Also known as

30Sh1

Same designation in the other standards

Same h × b × s × t in the JIS / KS chart

Sections of similar weight in the other series

All GOST I-Beams (Russia) sizes

Compare all 280 sizes in the GOST I-Beams (Russia) chart →

Sources

  1. ГОСТ Р 57837-2017, Двутавры стальные горячекатаные с параллельными гранями полок. Технические условия
  2. calcxactive: ГОСТ Р 57837-2017, ГОСТ 26020-83 and СТО АСЧМ 20-93 tables (MIT)
  3. ГОСТ 26020-83, Двутавры стальные горячекатаные с параллельными гранями полок. Сортамент
  4. СТО АСЧМ 20-93, Прокат стальной сортовой фасонного профиля. Двутавры горячекатаные с параллельными гранями полок
  5. Apibim BeamCraft: profiles-gost-26020.usda (MPL-2.0)
  6. BreezeCAD: beams.bzlib, ГОСТ 26020-83 table (MPL-2.0)
  7. kuvbur gdl_macro: section tables for ГОСТ 26020-83 Б and СТО АСЧМ 20-93 (MIT)
  8. Steel_structures_nodes: ГОСТ Р 57837-2017 profile list (cross-check of h, b, s, t)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.