AS568-014 O-Ring Size

O-Ring Sizes (AS568) · -004 to -050: 0.070 in (1.78 mm) cross-section

The AS568-014 O-ring has an inside diameter of 0.489 in (12.42 mm) and a cross-section of 0.070 in (1.78 mm), so its outside diameter is 0.629 in (15.98 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-014 (Parker), BS 1806 and ISO 3601-1 inch size 014, in any compound.

IDInside diameter
12.42 mm0.489 in0.489 in12.42 mm
CSCross-section
1.78 mm0.070 in0.070 in1.78 mm
ODOutside diameter (ref.)
15.98 mm0.629 in0.629 in15.98 mm

Drawing

OD 15.98 mmOD 0.629 inID 12.42 mmID 0.489 in
CS 1.78 mmCS 0.070 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-014 specifications

IDInside diameter0.489 in12.42 mm
CSCross-section0.070 in1.78 mm
ODOutside diameter (ref.)0.629 in15.98 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-0142-014AS568A-014AS568B-014#014

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.