AS568-016 O-Ring Size

O-Ring Sizes (AS568) · -004 to -050: 0.070 in (1.78 mm) cross-section

The AS568-016 O-ring has an inside diameter of 0.614 in (15.60 mm) and a cross-section of 0.070 in (1.78 mm), so its outside diameter is 0.754 in (19.15 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-016 (Parker), BS 1806 and ISO 3601-1 inch size 016, in any compound.

IDInside diameter
15.60 mm0.614 in0.614 in15.60 mm
CSCross-section
1.78 mm0.070 in0.070 in1.78 mm
ODOutside diameter (ref.)
19.15 mm0.754 in0.754 in19.15 mm

Drawing

OD 19.15 mmOD 0.754 inID 15.60 mmID 0.614 in
CS 1.78 mmCS 0.070 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-016 specifications

IDInside diameter0.614 in15.60 mm
CSCross-section0.070 in1.78 mm
ODOutside diameter (ref.)0.754 in19.15 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-0162-016AS568A-016AS568B-016#016

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.