AS568-031 O-Ring Size

O-Ring Sizes (AS568) · -004 to -050: 0.070 in (1.78 mm) cross-section

The AS568-031 O-ring has an inside diameter of 1.739 in (44.17 mm) and a cross-section of 0.070 in (1.78 mm), so its outside diameter is 1.879 in (47.73 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-031 (Parker), BS 1806 and ISO 3601-1 inch size 031, in any compound.

IDInside diameter
44.17 mm1.739 in1.739 in44.17 mm
CSCross-section
1.78 mm0.070 in0.070 in1.78 mm
ODOutside diameter (ref.)
47.73 mm1.879 in1.879 in47.73 mm

Drawing

OD 47.73 mmOD 1.879 inID 44.17 mmID 1.739 in
CS 1.78 mmCS 0.070 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-031 specifications

IDInside diameter1.739 in44.17 mm
CSCross-section0.070 in1.78 mm
ODOutside diameter (ref.)1.879 in47.73 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-0312-031AS568A-031AS568B-031#031

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.