AS568-035 O-Ring Size

O-Ring Sizes (AS568) · -004 to -050: 0.070 in (1.78 mm) cross-section

The AS568-035 O-ring has an inside diameter of 2.239 in (56.87 mm) and a cross-section of 0.070 in (1.78 mm), so its outside diameter is 2.379 in (60.43 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-035 (Parker), BS 1806 and ISO 3601-1 inch size 035, in any compound.

IDInside diameter
56.87 mm2.239 in2.239 in56.87 mm
CSCross-section
1.78 mm0.070 in0.070 in1.78 mm
ODOutside diameter (ref.)
60.43 mm2.379 in2.379 in60.43 mm

Drawing

OD 60.43 mmOD 2.379 inID 56.87 mmID 2.239 in
CS 1.78 mmCS 0.070 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-035 specifications

IDInside diameter2.239 in56.87 mm
CSCross-section0.070 in1.78 mm
ODOutside diameter (ref.)2.379 in60.43 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-0352-035AS568A-035AS568B-035#035

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.