AS568-113 O-Ring Size

O-Ring Sizes (AS568) · -102 to -178: 0.103 in (2.62 mm) cross-section

The AS568-113 O-ring has an inside diameter of 0.549 in (13.94 mm) and a cross-section of 0.103 in (2.62 mm), so its outside diameter is 0.755 in (19.18 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-113 (Parker), BS 1806 and ISO 3601-1 inch size 113, in any compound.

IDInside diameter
13.94 mm0.549 in0.549 in13.94 mm
CSCross-section
2.62 mm0.103 in0.103 in2.62 mm
ODOutside diameter (ref.)
19.18 mm0.755 in0.755 in19.18 mm

Drawing

OD 19.18 mmOD 0.755 inID 13.94 mmID 0.549 in
CS 2.62 mmCS 0.103 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-113 specifications

IDInside diameter0.549 in13.94 mm
CSCross-section0.103 in2.62 mm
ODOutside diameter (ref.)0.755 in19.18 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-1132-113AS568A-113AS568B-113#113

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.