AS568-125 O-Ring Size

O-Ring Sizes (AS568) · -102 to -178: 0.103 in (2.62 mm) cross-section

The AS568-125 O-ring has an inside diameter of 1.299 in (32.99 mm) and a cross-section of 0.103 in (2.62 mm), so its outside diameter is 1.505 in (38.23 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-125 (Parker), BS 1806 and ISO 3601-1 inch size 125, in any compound.

IDInside diameter
32.99 mm1.299 in1.299 in32.99 mm
CSCross-section
2.62 mm0.103 in0.103 in2.62 mm
ODOutside diameter (ref.)
38.23 mm1.505 in1.505 in38.23 mm

Drawing

OD 38.23 mmOD 1.505 inID 32.99 mmID 1.299 in
CS 2.62 mmCS 0.103 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-125 specifications

IDInside diameter1.299 in32.99 mm
CSCross-section0.103 in2.62 mm
ODOutside diameter (ref.)1.505 in38.23 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-1252-125AS568A-125AS568B-125#125

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.