AS568-162 O-Ring Size

O-Ring Sizes (AS568) · -102 to -178: 0.103 in (2.62 mm) cross-section

The AS568-162 O-ring has an inside diameter of 5.737 in (145.72 mm) and a cross-section of 0.103 in (2.62 mm), so its outside diameter is 5.943 in (150.95 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-162 (Parker), BS 1806 and ISO 3601-1 inch size 162, in any compound.

IDInside diameter
145.72 mm5.737 in5.737 in145.72 mm
CSCross-section
2.62 mm0.103 in0.103 in2.62 mm
ODOutside diameter (ref.)
150.95 mm5.943 in5.943 in150.95 mm

Drawing

OD 150.95 mmOD 5.943 inID 145.72 mmID 5.737 in
CS 2.62 mmCS 0.103 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-162 specifications

IDInside diameter5.737 in145.72 mm
CSCross-section0.103 in2.62 mm
ODOutside diameter (ref.)5.943 in150.95 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-1622-162AS568A-162AS568B-162#162

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.