AS568-164 O-Ring Size

O-Ring Sizes (AS568) · -102 to -178: 0.103 in (2.62 mm) cross-section

The AS568-164 O-ring has an inside diameter of 6.237 in (158.42 mm) and a cross-section of 0.103 in (2.62 mm), so its outside diameter is 6.443 in (163.65 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-164 (Parker), BS 1806 and ISO 3601-1 inch size 164, in any compound.

IDInside diameter
158.42 mm6.237 in6.237 in158.42 mm
CSCross-section
2.62 mm0.103 in0.103 in2.62 mm
ODOutside diameter (ref.)
163.65 mm6.443 in6.443 in163.65 mm

Drawing

OD 163.65 mmOD 6.443 inID 158.42 mmID 6.237 in
CS 2.62 mmCS 0.103 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-164 specifications

IDInside diameter6.237 in158.42 mm
CSCross-section0.103 in2.62 mm
ODOutside diameter (ref.)6.443 in163.65 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-1642-164AS568A-164AS568B-164#164

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.