AS568-215 O-Ring Size

O-Ring Sizes (AS568) · -201 to -284: 0.139 in (3.53 mm) cross-section

The AS568-215 O-ring has an inside diameter of 1.046 in (26.57 mm) and a cross-section of 0.139 in (3.53 mm), so its outside diameter is 1.324 in (33.63 mm). Cross-section tolerance is ± 0.004 in (0.10 mm). The same size is sold as 2-215 (Parker), BS 1806 and ISO 3601-1 inch size 215, in any compound.

IDInside diameter
26.57 mm1.046 in1.046 in26.57 mm
CSCross-section
3.53 mm0.139 in0.139 in3.53 mm
ODOutside diameter (ref.)
33.63 mm1.324 in1.324 in33.63 mm

Drawing

OD 33.63 mmOD 1.324 inID 26.57 mmID 1.046 in
CS 3.53 mmCS 0.139 in± 0.10 mm± 0.004 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-215 specifications

IDInside diameter1.046 in26.57 mm
CSCross-section0.139 in3.53 mm
ODOutside diameter (ref.)1.324 in33.63 mm
CS tolerance (±)0.004 in0.10 mm

Also known as

-2152-215AS568A-215AS568B-215#215

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.