AS568-226 O-Ring Size

O-Ring Sizes (AS568) · -201 to -284: 0.139 in (3.53 mm) cross-section

The AS568-226 O-ring has an inside diameter of 1.984 in (50.39 mm) and a cross-section of 0.139 in (3.53 mm), so its outside diameter is 2.262 in (57.45 mm). Cross-section tolerance is ± 0.004 in (0.10 mm). The same size is sold as 2-226 (Parker), BS 1806 and ISO 3601-1 inch size 226, in any compound.

IDInside diameter
50.39 mm1.984 in1.984 in50.39 mm
CSCross-section
3.53 mm0.139 in0.139 in3.53 mm
ODOutside diameter (ref.)
57.45 mm2.262 in2.262 in57.45 mm

Drawing

OD 57.45 mmOD 2.262 inID 50.39 mmID 1.984 in
CS 3.53 mmCS 0.139 in± 0.10 mm± 0.004 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-226 specifications

IDInside diameter1.984 in50.39 mm
CSCross-section0.139 in3.53 mm
ODOutside diameter (ref.)2.262 in57.45 mm
CS tolerance (±)0.004 in0.10 mm

Also known as

-2262-226AS568A-226AS568B-226#226

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.