AS568-229 O-Ring Size

O-Ring Sizes (AS568) · -201 to -284: 0.139 in (3.53 mm) cross-section

The AS568-229 O-ring has an inside diameter of 2.359 in (59.92 mm) and a cross-section of 0.139 in (3.53 mm), so its outside diameter is 2.637 in (66.98 mm). Cross-section tolerance is ± 0.004 in (0.10 mm). The same size is sold as 2-229 (Parker), BS 1806 and ISO 3601-1 inch size 229, in any compound.

IDInside diameter
59.92 mm2.359 in2.359 in59.92 mm
CSCross-section
3.53 mm0.139 in0.139 in3.53 mm
ODOutside diameter (ref.)
66.98 mm2.637 in2.637 in66.98 mm

Drawing

OD 66.98 mmOD 2.637 inID 59.92 mmID 2.359 in
CS 3.53 mmCS 0.139 in± 0.10 mm± 0.004 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-229 specifications

IDInside diameter2.359 in59.92 mm
CSCross-section0.139 in3.53 mm
ODOutside diameter (ref.)2.637 in66.98 mm
CS tolerance (±)0.004 in0.10 mm

Also known as

-2292-229AS568A-229AS568B-229#229

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.